Thanks for reply. I think I already made a crossover cable :<br>pins 1,2,4,5 and 4,5,1,2 and I still see red light on modem.<br><br>pin 1 is in rj45-1 and is going to pin 4 in rj45-2 (orange with white stripe) <br>pin 2 is in rj45-1 and is going to pin 5 in rj45-2 (solid orange)<br>
pin 4 is in rj45-1 and is going to pin 1 in rj45-2 (solid blue)<br>
pin 5 is in rj45-1 and is going to pin 2 in rj45-2 (blue with white stripe)<br clear="all"><br>Does color of wires matter ?<br><br>I showed a cable to telco workers when they mount isn pri modem and they said <br>its ok. I dunno what is the problem. When I put loopback in modem's port<br>
I still see red lights on rx. I know alarm should fall on their side and I need to<br>see no red lights right ? <br><br>Can you tell me is libtermcap package essential for compiling libpri or zaptel ?<br>I installed all packages except that because there is no such package on Ubuntu 8.04.<br>
Maybe libpri or zaptel did not compile ok because they could not find libtermcap ?<br>I din't see any error massages and both said compiled and installed succesfuly.<br><br>Maybe those lazy telco workers even did not activate number who knows everything <br>
is possible.<br><br>Thank you again<br>Uros<br>-- <br>Use Free Software <a href="http://www.fsf.org/">http://www.fsf.org/</a><br>-----------------------------------------------<br>Four essential software freedoms:<br>1) To study source code<br>
2) To copy program<br>3) To modify source code<br>4) To redistribute modified program under condition that new user has all 4 freedoms.<br>Richard M. Stallman<br>