<br><div class="gmail_quote">On Wed, Nov 12, 2008 at 12:25 PM, Peter Lindquist <span dir="ltr"><<a href="http://peter.lindquist.th">peter.lindquist.th</a>@<a href="http://gmail.com">gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi all,<br>
<br>
We have just set up trixbox latest with a Rhino r1t1 card, hooked up to<br>
a plain E1 PRI line. We call fine SIP to SIP, but as soon as we make a<br>
call from SIP to PSTN all sounds become unintelligible screeching or<br>
static kind of noise on both ends, when we call PSTN to SIP the PSTN<br>
side seemingly OK at least we hear no screeching sound, but the SIP side<br>
is a even worse screeching sound. To be certain all is as plain as<br>
possible we disabled all echo canceling, and we use only alaw.<br>
<br>
Any ideas on what this can be and how we start troubleshooting this?<br>
<br>
Best regards,<br>
<br>
Peter<br>
</blockquote><br>I would contact Rhino first and see if they can help, give them SSH.<br><br>But you can do a "pri intense debug span
1" and see if there is anything unusual. You could check
/var/log/messages as well as the Asterisk log. Try "cat
/proc/interrupts", not sure about rhino gear and interrupts. Try the card in a different slot. Make sure your cable is correct. Make sure your configs are correct.....<br></div><br>-- <br>Thanks,<br>Steve Totaro <br>
+18887771888 (Toll Free)<br>+12409381212 (Cell)<br>+12024369784 (Skype)<br>