<div>Hi All,</div>
<div> </div>
<div>I finally got the time to test t38 pass through with a TNT, * <a href="http://1.4.21.1">1.4.21.1</a> and Linksys 2102:</div>
<div> </div>
<div>PRI> <TNT> <SIP> <Asterisk> <2102> <SharpFax</div>
<div> </div>
<div>Faxing either direction, the call sets up with ulaw rtp, when fax tones hit the line, both the TNT and the 2102 switch to t38 and udptl packets fly through Asterisk. All looks good, but, once udptl sets up, every few seconds, I get a warning: 'rtp Read too short' on the Asterisk CLI from the TNT side of the session. Faxes never complete, not even a half page, nothing, transmission just ends.</div>
<div> </div>
<div>There are only a few parameters on the TNT that effect t38 and I've adjusted them all with no change in the results.</div>
<div> </div>
<div>Pretty much the same results when testing t38 pass through to a Cisco pri gateway as well.</div>
<div> </div>
<div>So my question is: Does anyone else have this solution working and wouldn't not mind sharing configs?</div>
<div> </div>
<div>Thanks.</div>
<div><br>JR<br>-- <br>---------------------<br>JR Richardson<br>Engineering for the Masses </div>