<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7036.0">
<TITLE>RE: [asterisk-users] Trouble with PRI config</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>Right again, getting a little closer (babysteps) ... no alarms on either system, but when I check the pri status in the CLI, I get PRI span 2/0: Provisioned, Down, Active. I've searched for clues, but am not coming up with the next step.<BR>
<BR>
-----Original Message-----<BR>
From: asterisk-users-bounces@lists.digium.com [<A HREF="mailto:asterisk-users-bounces@lists.digium.com">mailto:asterisk-users-bounces@lists.digium.com</A>] On Behalf Of Steve Totaro<BR>
Sent: Thursday, June 19, 2008 1:41 PM<BR>
To: Asterisk Users Mailing List - Non-Commercial Discussion<BR>
Subject: Re: [asterisk-users] Trouble with PRI config<BR>
<BR>
pri_net usually when connecting to a legacy system.<BR>
<BR>
Thanks,<BR>
Steve T<BR>
<BR>
On Thu, Jun 19, 2008 at 1:38 PM, Eve-Ellen Cole <ecole@mail.plymouth.edu> wrote:<BR>
> The underscore helped, but didn't resolve the real issue. Now I get the<BR>
> following messages:<BR>
><BR>
> [Jun 19 13:36:15] WARNING[4288] chan_zap.c: PRI Error on span 0: We think<BR>
> we're the CPE, but they think they're the CPE too.<BR>
><BR>
> [Jun 19 13:36:16] WARNING[4288] chan_zap.c: No D-channels available! Using<BR>
> Primary channel 48 as D-channel anyway!<BR>
><BR>
> -----Original Message-----<BR>
> From: asterisk-users-bounces@lists.digium.com<BR>
> [<A HREF="mailto:asterisk-users-bounces@lists.digium.com">mailto:asterisk-users-bounces@lists.digium.com</A>] On Behalf Of Steve Totaro<BR>
> Sent: Thursday, June 19, 2008 1:12 PM<BR>
> To: Asterisk Users Mailing List - Non-Commercial Discussion<BR>
> Subject: Re: [asterisk-users] Trouble with PRI config<BR>
><BR>
> Try underscore _ rather than dash -<BR>
><BR>
> Thanks,<BR>
> Steve T<BR>
><BR>
> On Thu, Jun 19, 2008 at 12:51 PM, Eve-Ellen Cole<BR>
> <ecole@mail.plymouth.edu> wrote:<BR>
>> I'm trying to connect Asterisk 1.4.20 to Avaya Definity G3R v11.1 via a T1<BR>
>> crossover, and I'm currently stuck. Anyone have any thoughts on what I<BR>
>> can<BR>
>> do to get past this?<BR>
>><BR>
>> Asterisk side<BR>
>><BR>
>> Digium TE220B w/ green LED (using port 2)<BR>
>><BR>
>> Zaptel.conf<BR>
>><BR>
>> span=2,1,0,esf,b8zs<BR>
>><BR>
>> bchan=25-47<BR>
>><BR>
>> dchan=48<BR>
>><BR>
>> loadzone = us<BR>
>><BR>
>> defaultzone=us<BR>
>><BR>
>> Zapata.conf<BR>
>><BR>
>> context=default<BR>
>><BR>
>> switchtype=national<BR>
>><BR>
>> ; T1 PRI to Avaya Definity G3R<BR>
>><BR>
>> context=from_pbx<BR>
>><BR>
>> signalling=pri-cpe<BR>
>><BR>
>> group=3<BR>
>><BR>
>> channel => 25<BR>
>><BR>
>> Avaya side<BR>
>><BR>
>> TN464GP<BR>
>><BR>
>> Ds1 01C14<BR>
>><BR>
>> Framing mode: esf<BR>
>><BR>
>> Line coding: b8zs<BR>
>><BR>
>> Signaling mode: isdn-pri<BR>
>><BR>
>> Connect: Network<BR>
>><BR>
>> Protocol version: b (national)<BR>
>><BR>
>> Near-end CSU type: other (for the T1 crossover)<BR>
>><BR>
>> Signaling group 6<BR>
>><BR>
>> Primary d-channel set to 01C14<BR>
>><BR>
>> When I restart Asterisk, the following lines get logged to<BR>
>> /var/log/asterisk/messages:<BR>
>><BR>
>> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Unknown signalling method<BR>
>> 'pri-cpe'<BR>
>><BR>
>> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Signalling must be specified<BR>
>> before any channels are.<BR>
>><BR>
>> If I change signaling method to pri-net:<BR>
>><BR>
>> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Unknown signalling method<BR>
>> 'pri-net'<BR>
>><BR>
>> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Signalling must be specified<BR>
>> before any channels are.<BR>
>><BR>
>> _______________________________________________<BR>
>> -- Bandwidth and Colocation Provided by <A HREF="http://www.api-digital.com">http://www.api-digital.com</A> --<BR>
>><BR>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona<BR>
>> Register Now: <A HREF="http://www.astricon.net">http://www.astricon.net</A><BR>
>><BR>
>> asterisk-users mailing list<BR>
>> To UNSUBSCRIBE or update options visit:<BR>
>> <A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A><BR>
>><BR>
><BR>
> _______________________________________________<BR>
> -- Bandwidth and Colocation Provided by <A HREF="http://www.api-digital.com">http://www.api-digital.com</A> --<BR>
><BR>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona<BR>
> Register Now: <A HREF="http://www.astricon.net">http://www.astricon.net</A><BR>
><BR>
> asterisk-users mailing list<BR>
> To UNSUBSCRIBE or update options visit:<BR>
> <A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A><BR>
><BR>
> _______________________________________________<BR>
> -- Bandwidth and Colocation Provided by <A HREF="http://www.api-digital.com">http://www.api-digital.com</A> --<BR>
><BR>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona<BR>
> Register Now: <A HREF="http://www.astricon.net">http://www.astricon.net</A><BR>
><BR>
> asterisk-users mailing list<BR>
> To UNSUBSCRIBE or update options visit:<BR>
> <A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A><BR>
><BR>
<BR>
_______________________________________________<BR>
-- Bandwidth and Colocation Provided by <A HREF="http://www.api-digital.com">http://www.api-digital.com</A> --<BR>
<BR>
AstriCon 2008 - September 22 - 25 Phoenix, Arizona<BR>
Register Now: <A HREF="http://www.astricon.net">http://www.astricon.net</A><BR>
<BR>
asterisk-users mailing list<BR>
To UNSUBSCRIBE or update options visit:<BR>
<A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A><BR>
</FONT>
</P>
</BODY>
</HTML>