<div>Additional output </div>
<div> </div>
<div>
<p>[root@localhost ~]# /sbin/ztcfg -vv</p>
<p>Zaptel Version: 1.4.9<br>Echo Canceller: MG2<br>Configuration<br>======================</p>
<p>SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)</p>
<p>Channel map:</p>
<p>Channel 01: Clear channel (Default) (Slaves: 01)<br>Channel 02: Clear channel (Default) (Slaves: 02)<br>Channel 03: Clear channel (Default) (Slaves: 03)<br>Channel 04: Clear channel (Default) (Slaves: 04)<br>Channel 05: Clear channel (Default) (Slaves: 05)<br>
Channel 06: Clear channel (Default) (Slaves: 06)<br>Channel 07: Clear channel (Default) (Slaves: 07)<br>Channel 08: Clear channel (Default) (Slaves: 08)<br>Channel 09: Clear channel (Default) (Slaves: 09)<br>Channel 10: Clear channel (Default) (Slaves: 10)<br>
Channel 11: Clear channel (Default) (Slaves: 11)<br>Channel 12: Clear channel (Default) (Slaves: 12)<br>Channel 13: Clear channel (Default) (Slaves: 13)<br>Channel 14: Clear channel (Default) (Slaves: 14)<br>Channel 15: Clear channel (Default) (Slaves: 15)<br>
Channel 16: Clear channel (Default) (Slaves: 16)<br>Channel 17: Clear channel (Default) (Slaves: 17)<br>Channel 18: Clear channel (Default) (Slaves: 18)<br>Channel 19: Clear channel (Default) (Slaves: 19)<br>Channel 20: Clear channel (Default) (Slaves: 20)<br>
Channel 21: Clear channel (Default) (Slaves: 21)<br>Channel 22: Clear channel (Default) (Slaves: 22)<br>Channel 23: Clear channel (Default) (Slaves: 23)<br>Channel 24: D-channel (Default) (Slaves: 24)</p>
<p>24 channels to configure.</p>
<p> </p><br><br> </div>
<div><span class="gmail_quote">On 3/15/08, <b class="gmail_sendername">broadband Voice</b> <<a href="mailto:broadbandvoice@gmail.com">broadbandvoice@gmail.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>Can you share with me sample extensions.conf? This is what I have</div>
<div> </div>
<div>exten => 215xxxxxxx,1,Dial(Zap/1)<br> </div>
<div>in zapata.conf</div>
<div><br><br>[channels] <br>context=external <br>switchtype=ni1 <br>resetinterval=3600 <br>overlapdial=no <br>priindication=outofband <br>facilityenable=yes <br>signalling=pri_cpe <br>usecallerid=yes <br>cidsignalling=bell <br>
hidecallerid=no <br>restrictcid=no <br>usecallingpres=yes <br>echocancel=yes <br>callerid=asreceived <br>faxdetect=incoming <br>nsf=sdn <br>group=1 <br>channel=>1-23 <br> </div>
<div>zaptel.conf</div>
<div>span=1,1,0,esf,b8zs<br>bchan=1-23<br>dchan=24 <br> </div>
<div><span class="e" id="q_118b20065a602000_1">
<div> </div>
<div> </div>
<div><br><br> </div>
<div><span class="gmail_quote">On 3/15/08, <b class="gmail_sendername">Darren Wright</b> <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:dwright@d2-tech.com" target="_blank">dwright@d2-tech.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Feel free to ping me off list. I've setup quite a few Cavtel PRI's with *.the paperwork they asked you to setup?<br>
<br>Typically, they only send 4 digits.<br><br>Do you have the questionnare they asked you to fill out?<br><br>dwright at d2 - tech dot com.<br><br>________________________________<br><br>From: <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:asterisk-users-bounces@lists.digium.com" target="_blank">asterisk-users-bounces@lists.digium.com</a> on behalf of broadband Voice<br>
Sent: Fri 3/14/2008 9:04 PM<br>To: Asterisk Users Mailing List - Non-Commercial Discussion<br>Subject: Re: [asterisk-users] DID T1 PRI<br><br><br>Thanks. I am in Philly. I may have to configure the extensions.conf well to pass the incoming channels.<br>
<br><br>On 3/14/08, Steve Totaro <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:stotaro@totarotechnologies.com" target="_blank">stotaro@totarotechnologies.com</a>> wrote:<br><br> On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice<br>
<<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:broadbandvoice@gmail.com" target="_blank">broadbandvoice@gmail.com</a>> wrote:<br> > I had Cavalier turn up a T1 PRI. How can I put in the DIDs to direct to<br>
> Asterisk. Here is a log<br> ><br> ><br> ><br> > Zaptel Tool (C)2002 Linux Support Services, Inc.<br> > тттттттттттттттттЄ T2XXP (PCI) Card 0 Span 1<br> > тттттттттттттттттт[3;10Hтterfaces ттттттттттттттттт ттттт[3;37Hт<br>
> т т<br> ><br> > т т<br> > т<br> > т Current Alarms: No alarms. т rd 0<br>
> Span 1 т т<br> > т Sync Source: T2XXP (PCI) Card 0 Span 1 т rd<br> > 0 Span 2 т(R) т<br> > т IRQ Misses: 0 т<br>
> т т<br> > т Bipolar Viol: 0 т<br> > т т<br> > т Tx/Rx Levels: 0/ 0 т<br> > т(R) т<br>
> т Total/Conf/Act: 24/ 24/ 0 т<br> > т т<br> > т 111111111122222 тттттттт т<br> > т т<br> > т 123456789012345678901234 т Back т т<br>
> т т<br> > т TxA ------------------------ тттттттт т<br> > т т<br> > т TxB ------------------------ т<br> > т т<br>
> т TxC ------------------------ т<br> > т<br> > т TxD ------------------------ т<br> > т<br> > т тттттттт т14Cт<br>
> т RxA ------------------------ т Loop т т<br> > т Quit т т<br> > т RxB ------------------------ тттттттт т<br> > тттттттт т<br>
> т RxC ------------------------ т<br> > т<br> > т RxD ------------------------ т<br> > тттттттттттттттттттттттттттттттттттттт<br>
> т т<br> > тттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттт<br> ><br> > T2XXP (PCI) Card 0 Span 1<br>
> F10=Back<br> ><br> ><br> > I need to add 215-xxx-xxxx etc to come in to the Asterisk box.<br> ><br> ><br><br> Do you have DIDs already? When you call a DID and watch the Asterisk<br>
console with a little verbose, you should see the call come and how<br> many digits the telco is sending.<br><br> Then you need to make matching entries for those DIDs either in the<br> form of exact matches or pattern matches to do pretty much whatever<br>
you can imagine.<br><br> Are you in Philly?<br><br> Thanks,<br> Steve Totaro<br><br> _______________________________________________<br> -- Bandwidth and Colocation Provided by <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.api-digital.com/" target="_blank">http://www.api-digital.com</a> <<a onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.api-digital.com/" target="_blank">http://www.api-digital.com/</a>> --<br>
<br> asterisk-users mailing list<br> To UNSUBSCRIBE or update options visit:<br> <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
<br><br><br>This message was sent from D2 Technology, INC.<br><br><br>_______________________________________________<br>-- Bandwidth and Colocation Provided by <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.api-digital.com/" target="_blank">http://www.api-digital.com</a> --<br>
<br>asterisk-users mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>
</blockquote></div><br></span></div></blockquote></div><br>