Dears,<br><br>After weeks trying to contact support of my telecom about 'Seize Ack' because that is not returned, was a lock for make calls on my E1s. <br><br>Now I receive back de Ack and get ready to make calls, but the technical support reports to me that my attempts to call do not send any digits to the oder site (telecom station). 8 seconds after start 'Unicall event Dialing' the line is disconnected, like when you take up the line and hold without press any digits, after some seconds you got the congestion signal.<br>
<br>Just for consideration I receive call without any problems, provided that performed the first setup.<br><br>I have use <a href="http://www.voip-info.org/wiki/view/Asterisk+MFC+R2" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">http://www.voip-info.org/wiki/view/Asterisk+MFC+R2</a> to do my configuration, sources are: <br>
<a href="http://www.moythreads.com/astunicall/files/astunicall-1.4.9-0.1.tar.gz" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">http://www.moythreads.com/astunicall/files/astunicall-1.4.9-0.1.tar.gz</a><br>
<br>zaptel-1.4.4-6<br>asterisk-1.4.9<br>libsupertone-0.0.2-1<br>
spandsp-0.0.4-1<br>libunicall-0.0.3-1<br>libmfcr2-0.0.3-1<br><br>The only difference is I have use the sources to make a SRPM -> RPM files on CentOS 5.<br><br>Here is my config files:<br><br><span style="font-weight: bold;">zaptel.conf<br>
<br></span>loadzone = br<br>defaultzone = br<br><br>span=1,1,0,cas,hdb3<br>span=2,2,0,cas,hdb3<br>span=3,3,0,cas,hdb3<br>cas=1-15:1101<br>cas=17-31:1101<br>cas=32-46:1101<br>cas=48-62:1101<br>cas=63-77:1101<br>
cas=79-93:1101<br><br><span style="font-weight: bold;">unicall.conf</span><br><br clear="all">[channels]<br>loglevel=255<br>language=pt_BR<br>context=from-pstn<br>usecallerid=yes<br>hidecallerid=no<br>immediate=no<br>callwaitingcallerid=yes<br>
threewaycalling=yes<br>transfer=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>rxgain=0.0<br>txgain=0.0<br>faxdetect=both<br>protocolclass=mfcr2<br>;protocolvariant=br,20,4,x,max-seize-wait-ack=10000<br>
protocolvariant=br,20,4<br>protocolend=cpe<br>group=1<br>callerid=asreceived<br>channel=>1-15<br>channel=>17-31<br>channel=>32-46<br>channel=>48-62<br>channel=>63-77<br>channel=>79-93<br>protocolclass=mfcr2<br>
<br><br><span style="font-weight: bold;">Here is the LOGS when I try do make calls</span><br><br>[Jan 30 16:41:17] VERBOSE[10717] logger.c: -- Executing [s@macro-dialout-trunk:32] Dial("SIP/4805-0935d828", "UniCall/g1|300|") in new stack<br>
[Jan 30 16:41:17] DEBUG[10717] chan_unicall.c: unicall_call called - 'g1'<br>[Jan 30 16:41:17] DEBUG[10717] chan_unicall.c: unicall_call caller id - '4805'<br>[Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Call control(1)<br>
[Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Make call<br>[Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Creating a new call with CRN 32769<br>[Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 0001 -> [1/DIALING /Seize /Idle ]<br>
[Jan 30 16:41:17] VERBOSE[10717] logger.c: -- Called g1<br>[Jan 30 16:41:17] NOTICE[10717] chan_unicall.c: Unicall/1 event Dialing<br>[Jan 30 16:41:17] NOTICE[10717] chan_unicall.c: Exception on 15, channel 1<br>[Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 <- 1111 [1/DIALING /Seize /Idle ]<br>
[Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 g on -> [2/DIALING /Group I /DNIS ]<br>[Jan 30 16:41:25] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 <- 4 on [2/DIALING /Group I /DNIS ]<br>
[Jan 30 16:41:25] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 g off -> [2/DIALING /Group I /DNIS ]<br>[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 <- 4 off [2/DIALING /Group I /DNIS ]<br>
[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Far end disconnected(cause=Switching equipment congestion [42]) - state 0x40<br>[Jan 30 16:41:26] NOTICE[10717] chan_unicall.c: Unicall/1 event Far end disconnected<br>
[Jan 30 16:41:26] NOTICE[10717] chan_unicall.c: CRN 32769 - far disconnected cause=Switching equipment congestion [42]<br>[Jan 30 16:41:26] VERBOSE[10717] logger.c: -- Channel 0 got hangup<br>[Jan 30 16:41:26] DEBUG[10717] chan_unicall.c: needcongestion<br>
[Jan 30 16:41:26] VERBOSE[10717] logger.c: -- UniCall/1-1 is circuit-busy<br>[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Channel gains<br>[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Channel switching<br>
[Jan 30 16:41:26] DEBUG[10717] chan_unicall.c: Hangup: channel: 1 index = 0, normal = 15, callwait = -1, thirdcall = -1<br>[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Call control(7)<br>[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Drop call(cause=Normal Clearing [16])<br>
[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Clearing fwd<br>[Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 1001 -> [2/FAR DISC/Clear fwd B /Idle ]<br>[Jan 30 16:41:26] DEBUG[10717] chan_unicall.c: Updated conferencing on 1, with 0 conference users<br>
[Jan 30 16:41:26] VERBOSE[10717] logger.c: -- Hungup 'UniCall/1-1'<br>[Jan 30 16:41:26] VERBOSE[10717] logger.c: == Everyone is busy/congested at this time (1:0/1/0)<br><br><br>If someone can help me I would be very grateful.<br>
<br>Best Regards,<br><br>-- <br><br>Roger C. Beraldi Martins<br>Fone: 55 41-8828-7068