<div>So here is my setup. </div>
<div> </div>
<div>Hardware:</div>
<div>Intel P3 1.2 Ghz</div>
<div>1 GB RAM</div>
<div>36 GB Drives Mirrored</div>
<div> </div>
<div>Software:</div>
<div>
<div>CentOS 5</div>
<div>2.6.18 Kernel</div></div>
<div> </div>
<div>Asterisk 1.4.14</div>
<div>Zaptel 1.4.7 (redfone)</div>
<div>LIbpri 1.4.2</div>
<div> </div>
<div>I'm using TDMoE with my PRI using a product called fonebridge from a company called redfone. They require that I use their own build of zaptel and I am trying to figure out if the problem is with them or something else. The TDMoE traffic is running over a dedicated interface on the asterisk server. Nothing but TDMoE traffic goes over this interface, it does not even have an IP assigned to it. </div>
<div> </div>
<div>After a about 6-7 days asterisk will stop passing calls through the PRI. It will continue to accept calls from extension to extension or to voicemail, etc. But nothing over zap channels. From the CLI if I check the status of the channels it shows all is well. If I use zttool it shows all OKs. And the lights on the fonebridge itself are green across the board as well. </div>
<div> </div>
<div>If I issue the command from the CLI to restart asterisk "restart now" it drops me to another CLI prompt as if it ran the command, but it didn't asterisk continues to run. It takes me dropping out of the CLI and issueing an init command to restart "/etc/init.d/asterisk restart". Once asterisk restarts all is well and things keep moving, but 5 or so days later the same thing happens. </div>
<div> </div>
<div>What's the best way to trouble shoot this? Any and all comments are welcome. Let me know if you need more details. </div>
<div> </div>
<div>- Mark</div>
<div> </div>
<div> </div>