Hi Moy,<br><br>Bottom line up front (yes I'm military):How do I now configure some of my spans as normal Euro ISDN and a few with R2? Do I use a combination of /etc/asterisk/unicall.conf and /etc/zaptel.conf or just unicall.conf
for everything?<br><br>See below for the rest of the details and thanks in advance for advice!<br><br>I downloaded your astunical-1.4.16 and have been studying it.<br><br>I have a machine running the latest download of asterisk-1.4-17
and was<br>trying to figure out how to build MFC/R2 support into it.<br><br>I merged your unicall specific changes from the Makefile in channels<br>directory to the new 1.4.17 channels Makefile (only like 4 changes).<br>
<br>Next I went into each individual directory of your tarball and started<br>building.<br><br>I did spandsp-0.0.4 first and that appeared to work OK.<br><br>Next I did libsupertone-0.0.2 which again appeared to work OK.<br>
<br>Next I did libunicall-0.0.3 which went OK.<br><br>Next I did libmfcr2-0.0.3 and that didn't go OK.<br><br>I captured the output of make and found that the build of mfcr2.c died<br>because it couldn't find the include file "linux/zaptel.h"
<br><br>I did a find on my system and saw where zaptel.h was in<br>/usr/include/zaptel/zaptel.h<br><br>Once I fixed that ... I backed out to the main asterisk-1.4.17 directory and<br>did a make there and it looked like it build chan_unicall OK and make
<br>install put the .so in the right place.<br><br>I noticed that your tarball did not include a unicall.conf file. Do you<br>have one?<br><br>I'm using two Digium TE420B (with DSP). Most of my trunks will be EURO ISDN
<br>and two of them need to do R2 signalling. How should my configs look? Are<br>all trunks configured with unicall.conf now or do I still have to use<br>/etc/zaptel.conf?<br><br>(time goes by)<br><br>rebooted the box and now it seg faults over and over because I guess I
<br>don't have the unicall conf set up right.<br><br>I've left for the day and I'm sending this from a mobile device so I<br>hope it makes it and looks ok. I'm in Iraq so I didn't want to lose a<br>day due to the time difference.
<br><br>Regards,<br><br>Brian<br>