Dears,<br><div id="result_box" dir="ltr"><br>After
having set up the board Digium TE420 to receive 3 E1s, I can receive calls
without difficulties. As you can see in the log below: <br> <br> -- Executing [5908@from-pstn:1] NoOp("UniCall/14-1", "Catch-All DID
Match - Found 5908 - You probably want a DID for this.") in new stack<br>
-- Executing [5908@from-pstn:2] Goto("UniCall/14-1", "ext-did|s|1") in new stack<br>
-- Goto (ext-did,s,1)<br>
-- Executing [s@ext-did:1] Set("UniCall/14-1", "__FROM_DID=s") in new stack<br>
-- Executing [s@ext-did:2] GotoIf("UniCall/14-1", "0 ?cidok") in new stack<br>
-- Executing [s@ext-did:3] Set("UniCall/14-1", "CALLERID(name)=4133602900") in new stack<br>
-- Executing [s@ext-did:4] NoOp("UniCall/14-1", "CallerID is "4133602900" <4133602900>") in new stack<br>
-- Executing [s@ext-did:5] Goto("UniCall/14-1", "ivr-3|s|1") in new stack<br>
-- Goto (ivr-3,s,1)<br>
*snip*<br>
-- Executing [s@ivr-3:10] BackGround("UniCall/14-1", "custom/celia") in new stack<br>
-- <UniCall/14-1> Playing 'custom/celia' (language 'br')<br>
-- Executing [h@ivr-3:1] Hangup("UniCall/14-1", "") in new stack<br>
-- Hungup 'UniCall/14-1'<br>
-- Unicall/14 released<br>
<br>
<br>
<div id="result_box" dir="ltr">Now I am having problems to make calls using the libunicall. The problem is clear in this line of the full log:</div><br> </div>[Dec 11 10:03:54] ERROR[12935] chan_unicall.c: Unicall/1 protocol error. Cause 32776
<br><br>Searching for the error I discovered it is "Seize ack timed out", but I do not know exactly of what it means or how to fix it. Here is de version of softwares/libs I have use (<a href="http://www.voip-info.org/wiki/view/Asterisk+MFC+R2">
http://www.voip-info.org/wiki/view/Asterisk+MFC+R2</a>). <br><br>asterisk-1.4.9<br>
spandsp-0.0.4 <br>
unicall-0.0.5pre1 <br>
zaptel-1.4.4<br>
<br>I already try using asterisk 1.4.10 but the comportment is the same. I don't believe the problem is in asterisk. I think my configs are correctly but not sure. Attached in text file follow the tests I have done using testunicall, config files from
zaptel.conf and unicall.conf I using on this solution. More logs is in the same file.<br><br><div id="result_box" dir="ltr">This can be caused by a problem with signaling between my settings and the standard of telephony service ?
<br></div><br>I'm using FreePBX with a Custon Trunk (Custon String Dial: UniCall/g1), my extensions_aditional has<br>the "OUT_3 = AMP:UniCall/g1" and "OUTMAXCHANS_3 = 10".<br><br><div id="result_box" dir="ltr">
Someone has already gone through a problem like this ? I would be grateful if received suggestions to correct it.</div><br><br>Log Full:<br><br>[Dec 11 10:03:51] VERBOSE[12935] logger.c: -- Executing [s@macro-dialout-trunk
:32] Dial("SIP/2290-09b18a68", "UniCall/g1|300|") in new stack<br>[Dec 11 10:03:51] DEBUG[12935] chan_unicall.c: unicall_call called - 'g1' <br>[Dec 11 10:03:51] DEBUG[12935] chan_unicall.c: unicall_call caller id - '2290'
<br>[Dec 11 10:03:51] VERBOSE[12935] logger.c: -- Called g1<br>[Dec 11 10:03:51] NOTICE[12935] chan_unicall.c: Unicall/1 event Dialing<br>[Dec 11 10:03:54] NOTICE[12935] chan_unicall.c: Unicall/1 event Protocol failure
<br>[Dec 11 10:03:54] ERROR[12935] chan_unicall.c: Unicall/1 protocol error. Cause 32776<br>[Dec 11 10:03:54] DEBUG[12935] chan_unicall.c: disabled echo cancellation on channel 1<br>[Dec 11 10:03:54] WARNING[12935] app_dial.c: Unable to forward voice or dtmf
<br>[Dec 11 10:03:54] DEBUG[12935] chan_unicall.c: Hangup: channel: 1 index = 0, normal = 10, callwait = -1, thirdcall = -1<br>[Dec 11 10:03:54] DEBUG[12935] chan_unicall.c: Updated conferencing on 1, with 0 conference users
<br>[Dec 11 10:03:54] VERBOSE[12935] logger.c: -- Hungup 'UniCall/1-1'<br>[Dec 11 10:03:54] VERBOSE[12935] logger.c: == Everyone is busy/congested at this time (1:0/0/1)<br><br clear="all"><br><br><br>-- <br>
Atenciosamente,<br><br>Roger C. Beraldi Martins<br>Fone: 41-8828-7068