Dear Armin,<br><br>This solve my problem, when I set softdtmf and relaxdtmf to off, my asterisk machine starts to detect the incoming fax calls.<br><br>Thank for your help.<br><br>VoipCrazy.<br><br><div><span class="gmail_quote">
2007/10/15, Armin Schindler <<a href="mailto:armin@melware.de">armin@melware.de</a>>:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
On Mon, 15 Oct 2007, voip crazy wrote:<br>> Dear Armin,<br>><br>> Bellow I send you my /etc/asterisk/capi.conf file, I just set<br>> faxdetect=both, but the card isn`t detect an incoming fax call.<br>><br>> I use capicommand(receivefax|...), and work well, but I need that asterisk
<br>> or the diva card detects an incoming fax call to send it to a specific<br>> context.<br>><br>> There are any way to use capicommand to detects fax incoming fax.<br><br>Don't set<br> softdtmf=on<br> relaxdtmf=on
<br>because your DIVA card can do this with the onboard DSPs and fax detection<br>should work then too.<br><br>Armin<br><br>> Thanks in advance.<br>><br>> VoipCrazy<br>><br>> ------Capi.conf-------<br>><br>
> [general]<br>> nationalprefix=0<br>> internationalprefix=00<br>> rxgain=1.0 ;linear receive gain (1.0 = no change)<br>> txgain=1.0 ;linear transmit gain (1.0 = no change)<br>> language=de ;set default language
<br>> ;ulaw=yes ;set this, if you live in u-law world instead of a-law<br>><br>> ;jb..... ;with Asterisk 1.4 you can configure jitterbuffer,<br>> ;see Asterisk documentation for all jb* setting available.
<br>> ;mohinterpret=default ;Asterisk 1.4: default music on hold class when placed<br>> on hold.<br>><br>><br>> ; interface sections ...<br>><br>> [ISDN] ;this example interface gets name 'ISDN1' and may be any
<br>> ;name not starting with 'g' or 'contr'.<br>> ;Use one interface section for each isdn port!<br>> ;ntmode=yes ;if isdn card operates in nt mode, set this to yes
<br>> isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial)<br>> ;when using NT-mode, 'DID' should be set in any case<br>> incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any
<br>> ;defaultcid=123 ;set a default caller id to that interface for dial-out,<br>> ;this caller id will be used when dial option 'd' is set.<br>> ;controller=0 ;ISDN4BSD default<br>> ;controller=7 ;ISDN4BSD USB default
<br>> controller=1 ;capi controller number of this interface/port<br>> group=1 ;dialout group<br>> ;prefix=0 ;set a prefix to calling number on incoming calls<br>> softdtmf=on ;enable/disable software dtmf detection, recommended for
<br>> AVM cards<br>> relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf<br>> detection<br>> faxdetect=both ;enable faxdetection and redirection to EXTEN 'fax' for<br>> incoming and/or
<br>> ;outgoing calls. (default='off', possible values:<br>> 'incoming','outgoing','both')<br>> accountcode=Canal-RDSI ;PBX accountcode to use in CDRs<br>> ;amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or
<br>> 'documentation')<br>> context=from-pstn ;context for incoming calls<br>> ;holdtype=hold ;when the PBX puts the call on hold, ISDN HOLD will be<br>> used. If<br>> ;set to 'local' (default value), no hold is done and the
<br>> PBX may<br>> ;play MOH.<br>> holdtype=local<br>> ;immediate=yes ;DID: immediate start of pbx with extension 's' if no<br>> digits were<br>> ; received on incoming call (no destination number yet)
<br>> ;MSN: start pbx on CONNECT_IND and don't wait for<br>> SETUP/SENDING-COMPLETE.<br>> ; info like REDIRECTINGNUMBER may be lost, but this is<br>> necessary for<br>> ; drivers/pbx/telco which does not send SETUP or
<br>> SENDING-COMPLETE.<br>> ;echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression<br>> ;echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation (yes=g165)<br>> ;(possible values: 'no', 'yes', 'force', 'g164', 'g165')
<br>> ;echocancelold=yes;use facility selector 6 instead of correct 8 (necessary<br>> for older eicon drivers)<br>> ;echotail=64 ;echo cancel tail setting (default=0 for maximum)<br>> ;echocancelnlp=1 ;activate non-linear-processing; this improves echo cancel
<br>> ratio, but might<br>> ;incorporate variable gain in the signal path.<br>> bridge=yes ;native bridging (CAPI line interconnect) if available<br>> ;callgroup=1 ;PBX call group<br>> ;pickupgroup=1 ;PBX pickup group (which call groups are we allowed to
<br>> pickup)<br>> ;language=de ;set language for this device (overwrites default language)<br>> ;disallow=all ;RTP codec selection (valid with Eicon DIVA Server only)<br>> allow=all ;RTP codec selection (valid with Eicon DIVA Server only)
<br>> devices=2 ;number of concurrent calls (b-channels) on this controller<br>> ;(2 makes sense for single BRI, 30/23 for PRI/T1)<br>> ;jb..... ;with Asterisk 1.4 you can configure jitterbuffer,
<br>> ;see Asterisk documentation for all jb* setting available.<br>> ;mohinterpret=default ;Asterisk 1.4: default music on hold class when placed<br>> on hold.<br>> ;qsig=on ;enable use of
Q.SIG extensions.<br>><br>> ----------------------EOF--------------------------<br>><br>><br>> 2007/10/15, Armin Schindler <<a href="mailto:armin@melware.de">armin@melware.de</a>>:<br>>><br>>> On Mon, 15 Oct 2007, voip crazy wrote:
<br>>>> Dear Armin,<br>>>><br>>>> the problem is my Eicon Diva Card does not detect aany fax-tone. Then<br>>> the<br>>>> call is redirect as a voice call instead a fax call.<br>>>>
<br>>>> How could I detect the fax.-tone with this kind of hardware?<br>>>> How could I enable receivefax?<br>>><br>>> Are we talking about a DIVA Server BRI card?<br>>> If yes, then the card can detect fax tone and you just need
<br>>> to enabled this in capi.conf.<br>>> Then capicommand(receivefax|...) will help you.<br>>><br>>> Armin<br>>><br>>>> 2007/10/15, Armin Schindler <<a href="mailto:armin@melware.de">
armin@melware.de</a>>:<br>>>>><br>>>>> Hello VoipCrazy !?<br>>>>><br>>>>> On Mon, 15 Oct 2007, voip crazy wrote:<br>>>>>> Hello all,<br>>>>>>
<br>>>>>> I am trying to set up asterisk and hylafax to send and receibe fax.<br>>> The<br>>>>>> machine is connected to the PSTN is an Eicon Diva BRI (1 BRI port).<br>>>>>> My problem is that , when I send a Fax from the PSTN to this
<br>>>>> machine, the<br>>>>>> asterisk or diva or hylafax, does not detect this call as a fax and<br>>>>> asterisk<br>>>>>> answer that call like a voice call.<br>>>>>>
<br>>>>>> How sould I configure the software modem (iaxmodem) to use with the<br>>>>> Eicon<br>>>>>> Diva card?<br>>>>>> What sould I do to make the Eicon Diva detects an incoming fax?
<br>>>>><br>>>>> If asterisk shall not accept this call, then configure asterisk not to<br>>> do<br>>>>> so. Either use another number, or check the transfercapability (if the<br>
>>>> sender did set this correct).<br>>>>> Why don't you receive the fax via asterisk? You can answer the call and<br>>> if<br>>>>> a fax-tone is detected, you switch to receivefax.
<br>>>>><br>>>>> Armin<br>>>>><br>>>>><br>>>>> _______________________________________________<br>>>>> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--">
http://www.api-digital.com--</a><br>>>>><br>>>>> asterisk-users mailing list<br>>>>> To UNSUBSCRIBE or update options visit:<br>>>>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">
http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>>>>><br>>>><br>>><br>>> _______________________________________________<br>>> --Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--">
http://www.api-digital.com--</a><br>>><br>>> asterisk-users mailing list<br>>> To UNSUBSCRIBE or update options visit:<br>>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users
</a><br>>><br>><br><br>_______________________________________________<br>--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--">http://www.api-digital.com--</a><br><br>asterisk-users mailing list
<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br>