<div> </div>
<div>Hi,</div>
<div> </div>
<div>you have to correct your etc/zaptel.conf as follows</div>
<div> </div>
<div>span=1,1,0,ccs,hdb3<br> bchan=1-15,17-31<br> dchan=16<br>span=2,0,0,ccs,hdb3<br> bchan=32-46,48-62<br> dchan=47<br> </div>
<div>then try</div>
<div> </div>
<div>Regards,</div>
<div>Vidura</div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div>======================</div>
<div> </div>
<div> I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI
<br><span></span><br>asterisk think PRI_CPE and remote end also CPE<br><br>i have configure /etc/zaptel.conf<br><br>span=1,1,0,ccs,hdb3<br> bchan=1-15,17-32<br> dchan=16<br>span=1,1,0,ccs,hdb3<br> bchan=32-46,49-62<br>
dchan=47<br><br><br>in /etc/asterisk/zapata.conf<br><br>switchtype=qsig<br> context=zap-in<br> signalling=pri_cpe<br> group=1<br> channel => 1-15,17-31<br><br> group=2<br> channel => 32-46,49-62<br><br><br>is this configuration is fine or any other problem
<br><br>when i call to my second e1 which i connected to direct telcom i got this error<br><br>call can't forward caz voice or dtmf<br><br>can anyone send my runing configuration file of zaptel.conf or zapata.conf file
<br><br>waiting for your reply<br><br>=======================</div>
<div> </div>
<div> </div>
<div> </div>