Hi,<br><br>I have (to me) an interesting problem.<br><br>There are 3 physical extensions, 11, 12 and 13. All hang off Sipura adapters. <br>There is also extension 10 which simply uses 'Dial(SIP/11&SIP/12&SIP/13)' to call all phones in the house.
<br><br>Incoming calls from outside get sent to 10 in order that they can be answered from any phone..<br><br>Now - if (say) 11 is on a call externally, and 12 calls 11 - 11 get's the call waiting beeps, and can 'flash' over to the new incoming call. No problem there.
<br><br>However, if 12 instead calls 10, in the log I see the Dial command sees 11 as 'In Use' and the call never causes the call waiting beep in 11.<br><br>Any way to change this? <br><br>Many thanks,<br><br>Michael.
<br>