Hello, I removed the two lines:<br><br><span class="q">nationalprefix = 0<br>internationalprefix = 00</span><br><br>And I run "bri debug span 1":<br><br>*CLI> bri debug span 1<br>Enabled debugging on span 1<br>
1 Timed out looking for release complete<br>1 > Protocol Discriminator: Q.931 (8) len=8<br>1 > Call Ref: len= 1 (reference 2/0x2) (Originator)<br>1 > Message type: RELEASE (77)<br>1 > [1 081 021 811 901 ]<br>
1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)<br>1 > Ext: 1 Cause: Unknown (16), class = Normal Event (1) ]<br>1 Final time-out looking for release complete
<br>1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null<br>1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br>Jun 13 11:23:40 WARNING[2226]: chan_zap.c:8463 pri_fixup_principle: Call specified, but not found?
<br> -- Executing Dial("SIP/101-d08c", "ZAP/g1/943833473|45|tTwW") in new stack<br>1 -- Making new call for cr 131<br> -- Requested transfer capability: 0x00 - SPEECH<br>1 > Protocol Discriminator:
Q.931 (8) len=32<br>1 > Call Ref: len= 1 (reference 3/0x3) (Originator)<br>1 > Message type: SETUP (5)<br>1 > [1 041 031 801 901 a31 ]<br>1 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
<br>1 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>1 > Ext: 1 User information layer 1: A-Law (35)<br>1 > [1 181 011 811 ]<br>1 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred Dchan: 0
<br>1 > ChanSel: B1 channel<br>1 ]<br>1 > [1 6c1 051 211 811 311 301 311 ]<br>1 > Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (
E.164/E.163) (1)<br>1 > Presentation: Presentation permitted, user number passed network screening (1) '101' ]<br>1 > [1 701 0a1 801 391 341 331 381 331 331 341 371 331 ]
<br>1 > Called Number (len=12) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '943833473' ]<br>1 > [1 a11 ]<br>1 > Sending Complete (len= 1)<br> -- Called g1/943833473<br>1 No response to SETUP message
<br>1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Initiated, peerstate Overlap sending<br>1 > Protocol Discriminator: Q.931 (8) len=8<br>1 > Call Ref: len= 1 (reference 3/0x3) (Originator)<br>1 > Message type: DISCONNECT (69)
<br>1 > [1 081 021 811 921 ]<br>1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)<br>1 > Ext: 1 Cause: Unknown (18), class = Normal Event (1) ]
<br> -- Channel 0/1, span 1 got hangup, cause 42<br> -- Zap/1-1 is circuit-busy<br>1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Request, peerstate Disconnect Indication<br> -- Hungup 'Zap/1-1'
<br> == Everyone is busy/congested at this time (1:0/1/0)<br> -- Executing Hangup("SIP/101-d08c", "") in new stack<br> == Spawn extension (SOME, 943833473, 102) exited non-zero on 'SIP/101-d08c'
<br><br>Is the same, anyones know what is???<br><br>Thanks a lot.<br><br>bye!!!<br><br><br><br><div><span class="gmail_quote">2007/6/12, Tzafrir Cohen <<a href="mailto:tzafrir.cohen@xorcom.com">tzafrir.cohen@xorcom.com
</a>>:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">On Tue, Jun 12, 2007 at 06:13:19PM +0200, Josu Lazkano wrote:<br>> Of course, thanks for respose Tzafrir.
<br>><br>> Here is my zapata.conf:<br>><br>> [trunkgroups]<br>><br>> [channels]<br>> language=es<br>> context=default<br>> switchtype = euroisdn<br>> signalling = bri_cpe_ptmp<br>> pridialplan = unknown
<br>> overlapdial = no<br>> usecallerid = yes<br>> callerid = asreceived<br>> callprogress = no<br>> hidecallerid = no<br>> nationalprefix = 0<br>> internationalprefix = 00<br><br>Try removing the above two lines and a restart.
<br><br>If that doesn't help, please run:<br><br>bri debug span 1<br><br>and provide a trace of an outgoing call.<br><br>> immediate = no<br>> faxdetect = incoming<br>> echocancel = yes<br>> echotraining = yes
<br>> echocancelwhenbridged = yes<br>> context = incoming<br>> group = 1<br>> threewaycalling = yes<br>> transfer = yes<br>> channel => 1-2<br>><br>><br>> I am having a lot of interrupt problem.
<br>><br>> Thanks for all.<br>><br>> Bye bye.<br>><br>> 2007/6/12, Tzafrir Cohen <<a href="mailto:tzafrir.cohen@xorcom.com">tzafrir.cohen@xorcom.com</a>>:<br>> ><br>> >On Tue, Jun 12, 2007 at 03:54:13PM +0200, Josu Lazkano wrote:
<br>> >> Hello everybody, I have installed the Billion ISDN on a Debian machine.<br>> >><br>> >> I proved to call with a ISDN telephone conected to ISDN Box and it is<br>> >OK. So<br>> >> I connect the Billion ISDN to the ISDN Box and I call from a extension
<br>> >to<br>> >> outside.<br>> >><br>> >><br>> >><br>> >> But it doesn't work, that is what I have in the CLI:<br>> >><br>> >> *CLI> -- Executing Dial("SIP/101-f9eb", "ZAP/g1/943833473|45|tTwW")
<br>> >in<br>> >> new stack<br>> >> -- Requested transfer capability: 0x00 - SPEECH<br>> >> -- Called g1/943833473<br>> >> -- Channel 0/1, span 1 got hangup, cause 42<br>
> >> -- Zap/1-1 is circuit-busy<br>> >> -- Hungup 'Zap/1-1'<br>> >> == Everyone is busy/congested at this time (1:0/1/0)<br>> >> -- Executing Hangup("SIP/101-f9eb", "") in new stack
<br>> >> == Spawn extension (SOME, 943833473, 102) exited non-zero on<br>> >> 'SIP/101-f9eb'<br>> >><br>> >> My extensions.conf is this one:<br>> >><br>> >> [general]
<br>> >> static=yes<br>> >> writeprotect=yes<br>> >><br>> >> [SOME]<br>> >> exten => 101,1,Dial(SIP/101,30,Ttm)<br>> >> exten => 101,2,Hangup<br>> >><br>
> >> exten => 102,1,Dial(SIP/102,30,Ttm)<br>> >> exten => 102,2,Hangup<br>> >><br>> >> exten => 103,1,Dial(SIP/103,30,Ttm)<br>> >> exten => 103,2,Hangup<br>> >>
<br>> >> exten => 104,1,Dial(SIP/104,30,Ttm)<br>> >> exten => 104,2,Hangup<br>> >><br>> >> include => outgoing<br>> >><br>> >> [incoming]<br>> >> exten => s,1,Wait(1)
<br>> >> exten => s,2,Answer()<br>> >> exten => s,3,Dial(SIP/101,30,Ttm)<br>> >><br>> >> [outgoing]<br>> >> exten =>_9XXXXXXXX,1,Dial(ZAP/g1/${EXTEN},45,tTwW)<br>> >> exten =>_9XXXXXXXX,2,Hangup()
<br>> >> exten =>_9XXXXXXXX,102,Hangup()<br>> >><br>> >> [default]<br>> >> exten => s,1,Answer()<br>> >> exten => s,2,Wait(1)<br>> >> exten => s,3,Dial(SIP/101,30,Ttm)
<br>> >><br>> >><br>> >> Why is that?<br>> ><br>> >Could you please provide your zapata.conf ?<br>> ><br>> >--<br>> > Tzafrir Cohen<br>> >icq#16849755
<a href="mailto:jabber:tzafrir@jabber.org">jabber:tzafrir@jabber.org</a><br>> >+972-50-7952406 mailto:<a href="mailto:tzafrir.cohen@xorcom.com">tzafrir.cohen@xorcom.com</a><br>> ><a href="http://www.xorcom.com">
http://www.xorcom.com</a> <a href="http://iax:guest@local.xorcom.com/tzafrir">iax:guest@local.xorcom.com/tzafrir</a><br>> >_______________________________________________<br>> >--Bandwidth and Colocation provided by
<a href="http://Easynews.com">Easynews.com</a> --<br>> ><br>> >asterisk-users mailing list<br>> >To UNSUBSCRIBE or update options visit:<br>> > <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">
http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>> ><br><br>> _______________________________________________<br>> --Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com
</a> --<br>><br>> asterisk-users mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users
</a><br><br><br>--<br> Tzafrir Cohen<br>icq#16849755 <a href="mailto:jabber:tzafrir@jabber.org">jabber:tzafrir@jabber.org</a><br>+972-50-7952406 mailto:<a href="mailto:tzafrir.cohen@xorcom.com">
tzafrir.cohen@xorcom.com</a><br><a href="http://www.xorcom.com">http://www.xorcom.com</a> <a href="http://iax:guest@local.xorcom.com/tzafrir">iax:guest@local.xorcom.com/tzafrir</a><br>_______________________________________________
<br>--Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com</a> --<br><br>asterisk-users mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">
http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br>