On 5/21/07, <b class="gmail_sendername">Vieri</b> <<a href="mailto:rentorbuy@yahoo.com">rentorbuy@yahoo.com</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>--- David Gomillion <<a href="mailto:david.gomillion@gmail.com">david.gomillion@gmail.com</a>> wrote:<br><br>> On 5/21/07, Vieri <<a href="mailto:rentorbuy@yahoo.com">rentorbuy@yahoo.com</a>> wrote:<br>
> ><br>> > Hi,<br>> ><br>> > My asterisk server was working with a 4-FXO analog<br>> > card (TDM400P).<br>> ><br>> > I recently added two digital cards: a TE120P (1<br>> PRI)<br>
> > and a B410P (4 BRI).<br>> ><br>> > The B410P is still unconfigured but inserted in a<br>> PCI<br>> > slot.<br>> ><br>> > The TE120P's jumper is set to E1 as it will<br>> connect to
<br>> > a commercial PBX's PRI card also configured as E1.<br>> ><br>> > My analog channels used to be 1-4 but since I<br>> added<br>> > the new cards I changed them to 101-104.<br>><br>>
<br>> I could be wrong here, but I don't think you get to<br>> arbitrarily make up what<br>> the channel numbers. At least I've never done that;<br>> I let the first channel<br>> be 1, second one 2, etc, through all of the cards,
<br>> based on loading order of<br>> the PCI cards. And are you sure about the loading<br>> order of the cards?<br><br>I'm sure you're right because the following yields no<br>error:<br><br># misdn-init stop
<br># rmmod wctdm<br># rmmod xpp<br># rmmod wcte12xp<br># rmmod zaptel<br># modprobe -a zaptel<br># modprobe -a wcte12xp<br># ztcfg -vvvvv<br><br><snip><br><br>I guess I'll have trouble getting all three cards to
<br>work together on the same box.</blockquote><div><br>You should still be able to get all of the cards working together. Just be sure you define your channels in the right order.<br></div><br></div><br>