<div>Hi List,</div> <div> </div> <div>I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI<BR>on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6). <BR>I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4 <BR>and asterisk-1.2.17</div> <div>When it's the time for ztcfg to do its job it complains with <BR><ZT_SPANCONFIG failed on span 2: No such device or address (6)></div> <div> </div> <div>I'm out of ideas what to do to make it to work. Your help is very much appreciated.</div> <div>The config files and results from various commands follow.</div> <div> </div> <div>Thanks,</div> <div><BR>Costa.</div> <div>---------------------------------------------------------------<BR>Zaptel Configuration<BR>======================</div> <div>SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)<BR>SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)<BR>SPAN 3: CCS/ AMI Build-out: 399-533 feet
(DSX-1)<BR>SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)</div> <div>Channel map:</div> <div>Channel 01: FXS Kewlstart (Default) (Slaves: 01)<BR>Channel 02: FXO Loopstart (Default) (Slaves: 02)<BR>Channel 03: FXS Kewlstart (Default) (Slaves: 03)<BR>Channel 04: FXO Loopstart (Default) (Slaves: 04)<BR>Channel 05: Clear channel (Default) (Slaves: 05)<BR>Channel 06: Clear channel (Default) (Slaves: 06)<BR>Channel 07: D-channel (Default) (Slaves: 07)<BR>Channel 08: Clear channel (Default) (Slaves: 08)<BR>Channel 09: Clear channel (Default) (Slaves: 09)<BR>Channel 10: D-channel (Default) (Slaves: 10)<BR>Channel 11: Clear channel (Default) (Slaves: 11)<BR>Channel 12: Clear channel (Default) (Slaves: 12)<BR>Channel 13: D-channel (Default) (Slaves: 13)<BR>Channel 14: Clear channel (Default) (Slaves: 14)<BR>Channel 15: Clear channel (Default) (Slaves: 15)<BR>Channel 16: D-channel (Default) (Slaves: 16)</div> <div>16 channels configured.</div> <div>ZT_SPANCONFIG failed on span
2: No such device or address (6)<BR>---------------------------------------------------------------</div> <div> </div> <div>The /etc/modprobe.d/blacklist file contains, amongst others, the following lines:<BR>------------------------------<BR>blacklist hisax<BR>blacklist hisax_fcpcipnp<BR>blacklist 8139cp<BR>blacklist hfc4s8s_l1<BR>------------------------------</div> <div> </div> <div>The /etc/zaptel.conf file looks like this:<BR>--------------------- zaptel.conf -----------------------------<BR># Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"<BR>fxsks=1<BR>fxols=2<BR>fxsks=3<BR>fxols=4</div> <div># Span 2-5: Junghans<BR>span=2,1,3,ccs,ami<BR>span=3,0,3,ccs,ami<BR>span=4,0,3,ccs,ami<BR>span=5,0,3,ccs,ami</div> <div>bchan=5,6<BR>dchan=7<BR>bchan=8,9<BR>dchan=10<BR>bchan=11,12<BR>dchan=13<BR>bchan=14,15<BR>dchan=16</div> <div># Global data</div> <div>loadzone = fr<BR>defaultzone =
fr<BR>---------------------------------------------------</div> <div> </div> <div>The <lsmod | grep zap> command gives the following:<BR>-------------------------------------------------------<BR>zaptel 182820 8 wcusb,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2,wctdm<BR>crc_ccitt 6337 2 zaptel,irda<BR>-------------------------------------------------------</div> <div> </div> <div>The lspci -vv command returns the following info in relation to the Junghanns card:<BR>----------------------------------------------------<BR>00:0a.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)<BR> Subsystem: Cologne Chip Designs GmbH HFC-4S [IOB4ST]<BR> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-<BR> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<BR> Interrupt: pin A routed to IRQ 5<BR> Region 0: I/O ports at d400 [size=8]<BR> Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=4K]<BR> Capabilities: [40] Power Management version 2<BR> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)<BR> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<BR>---------------------------------------------------</div> <div><BR> </div><p> 
<hr size=1>Ahhh...imagining that irresistible "new car" smell?<br> Check out
<a href="http://us.rd.yahoo.com/evt=48245/*http://autos.yahoo.com/new_cars.html;_ylc=X3oDMTE1YW1jcXJ2BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDbmV3LWNhcnM-">new cars at Yahoo! Autos.</a>