<div><br clear="all"><br>Hi All,</div>
<div> I would appreciate a lot if you could help me. I have installed Asterisk 1.4.1 and zaptel 1.4.2 on my redhat enterprise linux 4. I have also installed 1 FXO port card: Digium TDM400P.</div>
<div>After loading zaptel driver I could see my digium card's led glow green. Tested with zttool that its in OK state. I have configured fxsks=4 in zaptel.conf(channel 4 cause FXO module is on port 4). I have also configured channel 4 in incoming context in
zapata.conf.</div>
<div> </div>
<div>After all configuration I started asterisk with vvvvvgc and made a call, but I didn't see any call log on asterisk console.</div>
<div>When I did core show channels its showing 0 active channels. Looks like I did something wrong in my config.</div>
<div> </div>
<div>Also I dont see red-alarm in zttool if I take out pstn line.</div>
<div> </div>
<div>I have taken pstn line from my Vonage adapter and connecting that to my digium card.</div>
<div> </div>
<div>Any help will be appreciated.</div>
<div>Regards,</div>
<div>Vijay Gaur</div>