<div>Try to execute the command: lspci</div> <div> </div> <div>if the card is ok, you will found some informations such as:</div> <div> </div> <div>01:00.0 Communication controller: Motorola: Unknown device 5608<BR></div> <div>or </div> <div> </div> <div>something likes tigerjet</div> <div> </div> <div>If you can't find them, I think you have to unplug the card and insert it to another pci slot.</div> <div><BR><BR><B><I>Andrew D Kirch <trelane@trelane.net></I></B> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">David Ruggles wrote:<BR>> I'm trying to set up a simple test box to start developing with Asterisk.<BR>> <BR>> I've got a Dell GX150 with two X100P cards. I've downloaded, printed out and<BR>> read through most of TFOT. I've also done a lot of Internet searching.<BR>> <BR>> I'm getting this error:<BR>> ZT_CHANCONFIG failed on channel
1: No such device or address (6)<BR>> <BR>> Based on the searching I've done, it seems like the problem must be shared<BR>> IRQ issues. I've gone in the BIOS and disabled everything I can but I can't<BR>> stop the sharing completely. One X100P is shared with the built-in video and<BR>> the other X100P is shared with a serial controller. (I disabled both serial<BR>> ports)<BR>> <BR>> My question is this: (in three parts)<BR>> <BR>> 1) Are my research and assumptions accurate? Does this seem to be an IRQ<BR>> issue?<BR>> 2) If I have to build another system to prevent the IRQ problem, can anyone<BR>> recommend hardware (just for a simple test box right now)<BR>> 3) Is it worth keeping the X100Ps or should I get a TDM400P like used in<BR>> TFOT, or something else? (again just for testing)<BR>> <BR>> If there are other things I should check first please let me know!!<BR>> <BR>> TIA!!!!!<BR>> <BR>> Thanks,<BR>>
<BR>> David Ruggles<BR>> CCNA MCSE (NT) CNA A+<BR>> Network Engineer Safe Data, Inc.<BR>> (910) 285-7200 david@safedatausa.com<BR>> <BR>> <BR>> _______________________________________________<BR>> --Bandwidth and Colocation provided by Easynews.com --<BR>> <BR>> asterisk-users mailing list<BR>> To UNSUBSCRIBE or update options visit:<BR>> http://lists.digium.com/mailman/listinfo/asterisk-users<BR>The X100P is going to leave you fairly unsatisfied with your Asterisk <BR>experience. It lacks an on-card timing interface, and real X100P's <BR>haven't been made in quite awhile (several years). You may or may not <BR>get caller ID, you may or may not get two way audio. I know it's a bit <BR>more but you're better off with the TDM. Good luck!<BR><BR>-- <BR>Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org<BR>Security Admin | Summit Open Source Development Group | www.sosdg.org<BR>Key fingerprint = 4106 3338 1F17 1E6F 8FB2 8DFA 1331
7E25 C406 C8D2<BR>_______________________________________________<BR>--Bandwidth and Colocation provided by Easynews.com --<BR><BR>asterisk-users mailing list<BR>To UNSUBSCRIBE or update options visit:<BR>http://lists.digium.com/mailman/listinfo/asterisk-users<BR></BLOCKQUOTE><BR>