I am going to be on site at one of my recent installs tomorrow and I am hoping to fix an issue with the caller id. I would like suggestions for possible problem areas and so I thought I would give as much details as I can. The system has a Sangoma A200D card in it with 4 FXO ports and 2 FXS, The incoming pstn lines are all 3 part of a hunt group and At&t has confirmed the settings for caller id on all 3 lines. A call coming in on the third line has caller id, but the other 2 give the following messages in the CLI
<br><br>Nov 21 16:54:09 ERROR[6039] caller id.c: fsk_serie made mylen < 0 (-9)<br>Nov 21 16:54:09 WARNING[6039] chan_zap.c: CallerID feed failed: Success<br>Nov 21 16:54:09 WARNING[6039] chan_zap.c: CallerID returned with error on channel 'Zap/1-1'
<br><br>I have tried,<br><br>Recompiling my Zaptel and Asterisk version, both SVN checkouts of 1.2<br>Moving the 3rd line to a port on the other FXO module<br>Having At&t confirm the settings on all 3 lines.<br><br>My plan now is to go on site and double check the wiring for flaws and connect a standard phone to the lines and confirm the presence of caller id. aside from that, I have not had this error on any previous installs so I am asking the list for ideas and potential fixes. Thanks in advance for your help.
<br><br><br>zapata.conf snip<br><br>[channels]<br>;channel defaults<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=no<br>threewaycalling=yes<br>transfer=yes<br>echocancel=yes<br>immediate=no<br><br>group=1<br>context=from-pstn
<br>;rxgain=1.0<br>;txgain=2.0<br>signalling=fxs_ks<br>channel => 1-2<br><br>-- <br>Bruce<br>Nortex Networks