Hi Steve,<br><br>Thank you for your response. As you said, i tried. But, no result. Here I am sending my configuration file.<br><br>Contents in Zapata.conf:<br><br>[trunkgroups]<br>[channels]<br>language=en<br>context=from-zaptel<br>signalling=fxs_ks<br>rxwink=300 <br><br>usecallerid=yes<br>relaxdtmf=yes<br>dtmfmode=rfc2833<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=no<br>echotraining=800<br>rxgain=0.0<br>txgain=0.0<br>group=0<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br>busydetect=yes<br>busycount=6<br><br>group=1<br><br>Please tell me, if there are any modifications in config. files. So that, i will test it again. Looking forward to your response. Thank you.<br><br>Regards,<br>Chandra.<br><br><br><b><i>Steve Totaro <stotaro@asteriskhelpdesk.com></i></b> wrote:<blockquote class="replbq"
style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> Crazy Boy wrote:<br>> Hi,<br>><br>> Thank you for response. I configured DISA and its working sometimes <br>> and not working sometimes. Here I am sending the configuration and <br>> output on Asterisk server console:<br>><br>> Extensions.conf file content:<br>><br>> [custom-CLID]<br>> exten => s,1,Answer<br>> exten => s,2,DigitTimeout(5)<br>> exten => s,3,ResponseTimeout(10)<br>> exten => s,4,Authenticate(1234)<br>> exten => s,5,DISA(no-password|disa-ext)<br>><br>> [disa-ext]<br>> exten => _X.,1,DIAL(IAX2/chandra@teliax/${EXTEN},30,tr)<br>><br>> Output on server console:<br>><br>> -- Playing 'custom/v1' (language 'en')<br>> == CDR updated on Zap/1-1<br>> -- Executing Goto("Zap/1-1", "custom-CLID|s|1") in new stack<br>> -- Goto (custom-CLID,s,1)<br>> -- Executing
Answer("Zap/1-1", "") in new stack<br>> -- Executing DigitTimeout("Zap/1-1", "5") in new stack<br>> -- Set Digit Timeout to 5<br>> -- Executing ResponseTimeout("Zap/1-1", "10") in new stack<br>> -- Set Response Timeout to 10<br>> -- Executing Authenticate("Zap/1-1", "1234") in new stack<br>> -- Playing 'agent-pass' (language 'en')<br>> -- Playing 'auth-thankyou' (language 'en')<br>> -- Executing DISA("Zap/1-1", "no-password|disa-ext") in new stack<br>> -- Executing Dial("Zap/1-1", <br>> "IAX2/chandra@teliax/187773456|30|tr") in new stack<br>> -- Called chandra@teliax/187773456<br>> -- Hungup 'IAX2/teliax-1'<br>> == Everyone is busy/congested at this time (1:0/0/1)<br>> -- Hungup 'Zap/1-1'<br>><br>> What is happening is:<br>><br>> 1) I called my zap number from my mobile<br>> 2) My IVR is responding<br>> 3) I entered a extension number to access DISA<br>> 4)
Asterisk asked the secret (PIN) code to access DISA<br>> 5) I entered password of DISA<br>> 6) After validating the password, its giving Dial tone to dial a USA <br>> number<br>> 7) I entered 17187773456 (This is a toll free number) to test<br>> 8) Call is going sometimes and call is not going sometimes. If we <br>> observe on server console, its not taking my input number properly and <br>> taking my input phone number wrongly.<br>> 9) I tested from other mobiles also. But, its not taking my input <br>> number as i entered sometimes.<br>> 9) What is the wrong?<br>><br>> Please tell me. Looking forward to your response. Thank you.<br>><br>> Regards,<br>> Chandra.<br>><br>><br>Do you have relaxdtmf set in your zap conf file? Try from a landline <br>phone and see if you have the same issue. If you have relaxdtmf=yes try <br>no and test again, or do the opposite. It is obvious that asterisk is <br>getting dtmf but it is
mixing it up. <br><br>Also try dialing other companies IVRs and navigating the menus, maybe <br>your cell phone is just screwed up?<br><br>Is the call going through any other boxes that may have DTMF settings <br>misconfigured? I have seen DTMF come out in doubles (ie you press 911 <br>and asterisk sees 99111).<br><br>Thanks,<br>Steve Totaro<br><br>_______________________________________________<br>--Bandwidth and Colocation provided by Easynews.com --<br><br>asterisk-users mailing list<br>To UNSUBSCRIBE or update options visit:<br> http://lists.digium.com/mailman/listinfo/asterisk-users<br></blockquote><br><p> 
<hr size=1>Everyone is raving about <a href="http://us.rd.yahoo.com/evt=42297/*http://advision.webevents.yahoo.com/mailbeta">the all-new Yahoo! Mail beta.</a>