<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.5730.11" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello all. I have here a TE110P (configured as E1)
and a TDM400P (with four X100P - FXS). Both boards are recognized by the
operating system as showed above:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>0000:08:00.0 Communication controller: Tiger Jet
Network Inc. Tiger3XX Modem/ISDN
interface<BR> Subsystem: Unknown
device b1d9:0003<BR> Flags: bus
master, medium devsel, latency 64, IRQ
169<BR> I/O ports at e800
[size=256]<BR> Memory at febff000
(32-bit, non-prefetchable)
[size=4K]<BR> Capabilities: [40] Power
Management version 2</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>0000:08:01.0 Network controller: Tiger Jet Network
Inc. Tiger3XX Modem/ISDN interface<BR>
Subsystem: Unknown device
79fe:0001<BR> Flags: bus master,
medium devsel, latency 64, IRQ 193<BR>
I/O ports at e400 [size=256]<BR>
Memory at febfe000 (32-bit, non-prefetchable)
[size=4K]<BR> Capabilities: [40] Power
Management version 2</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>The problem is that I cant make the both cards
to work together in the same server. Here is my /etc/zaptel.conf:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>###<BR>fxsks=1-4<BR>loadzone =
us<BR>defaultzone=us</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial
size=2>span=1,1,0,ccs,hdb3,crc4<BR>bchan=5-19,21-35<BR>dchan=20<BR>###</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>When I load the wctdm module, I get this error:
ZT_CHANCONFIG failed on channel 5: No such device or address (6). Its sounds
like the FXS module its tring to configure the channels 5 to 35 (E1 - ISDN
Channels - TE110P card).</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Anybody already saw this ? Its possible to use this
two cards in the same computer ? There is any separator that I can use in
zaptel.conf to make the load of the modules dont mistakes itself ?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Here is my versions:<BR>Debian kernel -
2.6.8<BR>asterisk-1.2.12.1<BR>libpri-1.2.4<BR>zaptel-1.2.11 </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2>Lincoln</FONT></DIV></BODY></HTML>