Hi<br><br>I'm trying to generate a Recall/Flash on an FXO (TDM400) connected to a PABX and failing at the moment. I was using the Flash <br>application, which seems to generate a hook flash as opposed to a Recall. Debugging the Zap channel output using a second FXS channel gives me the following
<br><br><< [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1]<br><< [ TYPE: DTMF (1) SUBCLASS: 1 (49) ] [Zap/1-1]<br><br>when I press Recall on the type of phone I'm trying to mimic and<br><br><< [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1]
<br><< [ TYPE: Control (4) SUBCLASS: Flash (9) ] [Zap/1-1]<br><br>when I use the Flash application. <br><br>I have 3 questions which I'd greatly appreciate answers to<br><br>1) Is it possible to generate the <br><br>
<br><< [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1]<br><br>only using a Zap channel? <br><br>2) If it is, is there an easy way to do this, or do I have to delve into zaptel / asterisk code?<br><br>3) If I have to delve into asterisk code, which areas should I be looking at? As a newbie to the whole zaptel architecture and
<br>asterisk code base who is on a rather tight schedule if I have to go this route then any pointers as to where I should be looking <br>and what I should be doing would be hugely appreciated<br><br>I've searched high and low and can't seem to find answers to any of these questions.
<br><br>Thanks<br><br>Dululu<br><br>