<DIV>You should run the 4ESS protocol ("a" on the Definity command "change DS1 board#) as the Definity may not send Display Name for the NI-2 protocol (settings "b" or "d")</DIV>
<DIV> </DIV>
<DIV>Remember to make the Asterisk zapata settings consistent with the Definity.</DIV>
<DIV> </DIV>
<DIV>On the Definity trunk group form Page 1, change "Codeset to send Display" to "0 (zero)", also make sure Outgoing Display is "y" . On Page 2, make sure Send Name and Send Calling Number are "y".</DIV>
<DIV> </DIV>
<DIV>Setting Send UCID = "n" as well as Send Codeset 6/7LAI = "n", will clean up those Unknown IEs.</DIV>
<DIV> </DIV>
<DIV>The Zaptel software only supports CodeSet 0 Information Elements so the Display Name has to be in Codeset 0.</DIV>
<DIV> </DIV>
<DIV>Mark<BR><BR>> > <BR>> !! < Unknown IE 1544 (len = 6)<BR>> <BR>> !! Unknown IE 8 (cs6, Unknown Information Element)<BR>> <BR>> Progress Description: Calling equipment is non-ISDN<BR>> <BR>> TON: International Number<BR>> <BR>> <BR>> <BR>> <BR>> <BR>> xxx*CLI><BR>> <BR>> < [ 02 01 d4 d2 08 02 0a e6 05 04 03 90 90 a2 18 03 a1 83 8b 1e <BR>> 02 81 83<BR>> 70 05 91 34 33 38 39 96 08 04 d0 35 30 80 ]<BR>> <BR></DIV>