<DIV>Assuming that you are in the US (don't know about elsewhere), the Calling Party Name is obtained by a database lookup performed by the PSTN switch terminating the call. Calling Party Name is the name assigned to your line or location by the phone company. You can't "send" it. You can only receive it, if the phone company has it to transmit in the FACILITY message.</DIV>
<DIV> </DIV>
<DIV>Display Name is something totally different. The Display Name is the name assigned to a station behind a PBX. Enterprises will send it between corporate locations if the sites are linked by private line or a network service like AT&T's Software Defined Network (SDN). It is generally not exchanged across the PSTN.</DIV>
<DIV><BR>> Date: Thu, 12 Oct 2006 14:38:39 -0400<BR>> From: "Zeeshan Zakaria" <ZISHANOV@GMAIL.COM><BR>> Subject: Re: [asterisk-users] How to send correct Caller ID on PRI<BR>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"<BR>> <ASTERISK-USERS@LISTS.DIGIUM.COM><BR>> Message-ID:<BR>> <5ad99e890610121138q5ccd32afqc6a5a8e0cad572e@mail.gmail.com><BR>> Content-Type: text/plain; charset="iso-8859-1"<BR>> <BR>> I set up facilityenable=yes in zapata.conf, but it still didn't <BR>> work for<BR>> caller name.<BR>> <BR>> Searched google and found out that when Asterisk is configured <BR>> as switchtype<BR>> National with signalling pri_net, it does not send the Display <BR>> informationin the Facility message. Asterisk insead puts the <BR>> Caller Name in the Display<BR>> IE.<BR>> <BR>> In my case signalling is set as pri_cpe but still caller name <BR>> doesn't go<BR>> through. Only Caller ID goes.<BR>> <BR>> PRI provider has confirmed that they are not blocking it.<BR>> <BR>> Any ideas how to fix this problem?<BR>></DIV>