<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Dave Fullerton escribió:
<blockquote cite="mid44F5D3E2.5000302@shorelinecontainer.com"
type="cite">Francisco Seratti wrote:
<br>
<blockquote type="cite">Hi pals, im trying to save some money in
cellphones calls, so i bought a GSM gateway and a Sipura SPA3000
gateway.
<br>
The GSM gw is currently working, and now im trying to configure the
SPA, but every call i send, i get a 503 service unavailable.
<br>
Im using this extension to match cell calls and sendthem to the spa:
<br>
<br>
exten => _15.,1,Dial(SIP/300/${EXTEN}) ; cellphones are 15xxxxxxxx
and 300 is the spa3000 extension, registered OK
<br>
exten => _15.,2,Hangup
<br>
<br>
In the dialplan section of the sipura, i ve tried many different
options like xx.<:@gw0>, (xx.) and many others.
<br>
I cannot find a formal configuration doc for this device, so if you
giveme a hand to configure it or tellme where to start, or where
<br>
is the problem i would be very pleased.
<br>
<br>
</blockquote>
<br>
This may be a stupid question, but are you sure you are using the
registration for the FXO port (PSTN Line) and not the FXS port (line 1)
<br>
? I usually don't give my trunk lines extension numbers is why I ask.
<br>
<br>
-Dave
<br>
_______________________________________________
<br>
--Bandwidth and Colocation provided by Easynews.com --
<br>
<br>
asterisk-users mailing list
<br>
To UNSUBSCRIBE or update options visit:
<br>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
<br>
<br>
__________ NOD32 1.1730 (20060829) Information __________
<br>
<br>
This message was checked by NOD32 antivirus system.
<br>
<a class="moz-txt-link-freetext" href="http://www.eset.com">http://www.eset.com</a>
<br>
<br>
<br>
<br>
</blockquote>
Dave, thanks for your time. Yes, im sure it was the FXO port that i
regitered in the Asterisk. Do you know in which cases a 503 "Service
Unavailable" is obtained?<br>
I also configured the syslog for this line and im getting just before
the 503 response, the line: "<151>AUD:Stop PSTN Tone". I dont
know what is this, but maybe a clue. If you need an extra data or
config,, ask to me.<br>
<br>
<div class="moz-signature">-- <br>
<font face="Trebuchet MS" size="2">Francisco Seratti<br>
Sunesys Telecomunicaciones<br>
Bouchard 644. 5to A. Puerto Madero<br>
<a href="mailto:seratti@sunesys.com.ar" style="text-decoration: none;">seratti@sunesys.com.ar</a><br>
Tel: (54) 011- 4311-9009 (Rotativas)<br>
</font>
</div>
</body>
</html>