About the ANI problem, in Brazil I use the following parameter for protocolvariant.<br><br>protocolvariant=br,20,16,16<br><br>I have the following configuration:<br><br>Astetrisk ---- E1 ----- PBX----E1----Telco<br><br><br>
But Steve, after changing versions it really started to work without any modification in the .conf files. It was simple as that: before nothing worked and I had plenty of error messages from the MFC/R2 on the Asterisk log and after installing the different version it started to work. So I considered not to troubleshoot the problem because it had been resolved. As both files has different sizes, surely there is a difference between them.
<br><br>Thierry<br><br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote"><blockquote>><br>> Hi Carlos,<br>><br>> I had the same problem and spent a lot of time studying the MFC/R2
<br>> protocol .... but the problem is in the libmfcr2 package version!!<br>><br>> Try using the packages in:<br>><br>> <a href="http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7</a><br>><br>> And not in pre9.<br>><br>> Both "pre7" and "pre9" have libmfcr2-0.0.3.tar.gz<br>> <<a href="http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7/libmfcr2-0.0.3.tar.gz" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7/libmfcr2-0.0.3.tar.gz</a>><br>> with the same name.. but in different sizes. They are different.<br><br>pre9 works just fine. His problem is something completely different. His
<br>configuration does not match the requirements of the PBX.<br><br>Steve<br></blockquote></blockquote>