<HTML>
<FONT SIZE="2" POINTSIZE="11" DEFAULT="SIZE">BTW, whether the streams pass through the server constantly, or not, depends upon how you set things up. If you allow reinvites for each end point and don't force Asterisk to monitor call progress then the streams will not pass through the server once the call is established. <BR>
<BR>
If you plan on using voicemail, MOH, or other codecs then you will typically need G.729a codecs installed to permit transcoding.<BR>
<BR>
Michael Graves<BR>
<BR>
<BR>
--Original Message Text---<BR>
<B>From:</B> Michael Graves<BR>
<B>Date:</B> Sun, 06 Aug 2006 07:57:35 -0500<BR>
<BR>
In fact I will handle G.729a. Most likely two calls. This hardware complement is very close to that of a Soekris Net4801, which I use running Astlinux & 2 G.729a licenses. It handles two calls at a time, but any more and the calls get choppy and stutter.<BR>
<BR>
Michael<BR>
<BR>
--Original Message Text---<BR>
<B>From:</B> Dovid Bender<BR>
<B>Date:</B> Sun, 6 Aug 2006 04:08:47 -0400<BR>
<BR>
<FONT SIZE="2" POINTSIZE="10">If you are asking if the server can handle it it may, it may not. I highly doubt that a 266Mhz will be able to handle it. <BR>
----- Original Message ----- <BR>
<B>From:</B> Walter Willis<FONT COLOR=000000 DEFAULT="COLOR"> <BR>
<B>To:</B> asterisk@jehster.net ; Asterisk Users Mailing List - Non-Commercial Discussion <BR>
<B>Sent:</B> Saturday, August 05, 2006 9:16 PM<BR>
<B>Subject:</B> [asterisk-users] g729 and trafic<BR>
<BR>
<BR>
i am install server asterisk with 266Mhz , disk scsi and 380 Megas of ram.<BR>
<BR>
i am install into system the licence the codec g729 and the call it happens through the asterisk??<BR>
<BR>
the packets nessesarity through server asterisk ? <BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</HTML>