<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hello all. I have a Digitum TE110P board configured and working (I
think that it's working). When I configure in extensions.conf to a
extension route to that board I get "Unable to create channel of type
'Zap'" on log.<br>
<br>
Here are some configuration:<br>
<br>
<small><i><small><b>lspci -vv</b><br>
0000:01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface<br>
Subsystem: Unknown device 795e:0001<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-<br>
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 64 (250ns min, 32000ns max)<br>
Interrupt: pin A routed to IRQ 11<br>
Region 0: I/O ports at c800 [size=256]<br>
Region 1: Memory at fc5ff000 (32-bit, non-prefetchable)
[size=4K]<br>
Capabilities: [40] Power Management version 2<br>
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)<br>
Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
<b>ztcfg -vv</b><br>
Zaptel Configuration<br>
======================<br>
<br>
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)<br>
<br>
Channel map:<br>
<br>
Channel 01: Individual Clear channel (Default) (Slaves: 01)<br>
Channel 02: Individual Clear channel (Default) (Slaves: 02)<br>
Channel 03: Individual Clear channel (Default) (Slaves: 03)<br>
Channel 04: Individual Clear channel (Default) (Slaves: 04)<br>
Channel 05: Individual Clear channel (Default) (Slaves: 05)<br>
Channel 06: Individual Clear channel (Default) (Slaves: 06)<br>
Channel 07: Individual Clear channel (Default) (Slaves: 07)<br>
Channel 08: Individual Clear channel (Default) (Slaves: 08)<br>
Channel 09: Individual Clear channel (Default) (Slaves: 09)<br>
Channel 10: Individual Clear channel (Default) (Slaves: 10)<br>
Channel 11: Individual Clear channel (Default) (Slaves: 11)<br>
Channel 12: Individual Clear channel (Default) (Slaves: 12)<br>
Channel 13: Individual Clear channel (Default) (Slaves: 13)<br>
Channel 14: Individual Clear channel (Default) (Slaves: 14)<br>
Channel 15: Individual Clear channel (Default) (Slaves: 15)<br>
Channel 16: D-channel (Default) (Slaves: 16)<br>
Channel 17: Individual Clear channel (Default) (Slaves: 17)<br>
Channel 18: Individual Clear channel (Default) (Slaves: 18)<br>
Channel 19: Individual Clear channel (Default) (Slaves: 19)<br>
Channel 20: Individual Clear channel (Default) (Slaves: 20)<br>
Channel 21: Individual Clear channel (Default) (Slaves: 21)<br>
Channel 22: Individual Clear channel (Default) (Slaves: 22)<br>
Channel 23: Individual Clear channel (Default) (Slaves: 23)<br>
Channel 24: Individual Clear channel (Default) (Slaves: 24)<br>
Channel 25: Individual Clear channel (Default) (Slaves: 25)<br>
Channel 26: Individual Clear channel (Default) (Slaves: 26)<br>
Channel 27: Individual Clear channel (Default) (Slaves: 27)<br>
Channel 28: Individual Clear channel (Default) (Slaves: 28)<br>
Channel 29: Individual Clear channel (Default) (Slaves: 29)<br>
Channel 30: Individual Clear channel (Default) (Slaves: 30)<br>
Channel 31: Individual Clear channel (Default) (Slaves: 31)<br>
<br>
31 channels configured.<br>
<br>
<b>My zaptel.cfg</b><br>
span=1,0,0,cas,hdb3<br>
loadzone=us<br>
defaultzone=us<br>
bchan=1-15,17-31<br>
dchan=16<br>
<br>
<b>My zapata.conf</b><br>
[channels]<br>
context=customer<br>
signalling=pri_cpe<br>
channel => 1<br>
<br>
<b>My extensions.conf</b><br>
exten => 4502,1,Dial(Zap/1/4502)<br>
<br>
<b>show channels in Asterisk CLI:</b><br>
Channel (Context Extension Pri ) State Appl.
Data<br>
0 active channel(s)<br>
<br>
<b>zap show channels in Asterisk CLI:</b><br>
Chan Extension Context Language MusicOnHold<br>
pseudo customer<br>
1 customer<br>
<br>
<b>zap show channel 1 in Asterisk CLI:</b><br>
hannel: 1><br>
File Descriptor: 10<br>
Span: 1<br>
Extension:<br>
Dialing: no<br>
Context: corsidian<br>
Caller ID string:<br>
Destroy: 0<br>
InAlarm: 0<br>
Signalling Type: PRI Signalling<br>
Owner: <None><br>
Real: <None><br>
Callwait: <None><br>
Threeway: <None><br>
Confno: -1<br>
Propagated Conference: -1<br>
Real in conference: 0<br>
DSP: no<br>
Relax DTMF: no<br>
Dialing/CallwaitCAS: 0/0<br>
Default law: alaw<br>
Fax Handled: no<br>
Pulse phone: no<br>
Echo Cancellation: 0 taps unless TDM bridged, currently OFF<br>
PRI Flags:<br>
PRI Logical Span: Implicit<br>
Actual Hookstate: Onhook</small></i></small><br>
<br>
When I dial 4502 in the softphone I get <i>"Unable to create channel
of type 'Zap'".<br>
</i>Could anybody give to me a little help ?<br>
<br>
Thanks a lot !<br>
Lincoln<br>
<br>
</body>
</html>