<div>Hi all,</div>
<div> </div>
<div>Your help would be greatly appreciated, I have been struggling for days with inst / config of TDM01B.</div>
<div> </div>
<div>I have installed TDM01B.</div>
<div> </div>
<div>Using Asterisk <a href="http://1.2.9.1">1.2.9.1</a> on RH Ent 4.00</div>
<div> </div>
<div>cat /proc/interrupts shows card wctdm on int 10.</div>
<div> </div>
<div>Green LED is on (module is in port 4).</div>
<div> </div>
<div>I have my /etc/zaptel.conf which includes fxsks=4</div>
<div> </div>
<div>zttool show my card.</div>
<div>ztcfg -vv shows my card.</div>
<div> </div>
<div>zap show status shows my card but I see only pseudo under zap show channels.</div>
<div> </div>
<div>Furthermore, when I call my pstn line, I see no activity on the CLI</div>
<div> </div>
<div>I even tried </div>
<div> </div>
<div>[pstn-line]</div>
<div>exten => s,1,answer()</div>
<div>
<div>exten => s,2,hangup()</div></div>
<div> </div>
<div>I can't get it to work.</div>
<div> </div>
<div>Here is my zapata.conf</div>
<div> </div>
<div>[channels]<br>context=pstn-line<br>signalling=fxs_ks<br>echocancel=yes<br>echotraining=800<br>echocancelwhenbridged=no<br>rxgain=0.0<br>txgain=0.0<br>immediate=no<br>callprogress=no<br>;channel => 4<br> </div>
<div>If I uncomment channel => 4, asterisk will not start.</div>
<div> </div>
<div>Looking forward to any response!</div>
<div> </div>
<div>(I have looked at very helpful post at <a href="http://lists.digium.com/pipermail/asterisk-users/2005-March/090564.html">http://lists.digium.com/pipermail/asterisk-users/2005-March/090564.html</a> with no success)</div>
<div><br>-- <br>Sean Browne<br>Cardiff IT Support Ltd<br>08456 442 551<br><a href="http://www.cardiffitsupport.com">http://www.cardiffitsupport.com</a> </div>