<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7226.0">
<TITLE>ICLID or CNAM calling name and number through a cisco isdn gateway</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/rtf format -->
<P><FONT SIZE=2 FACE="Arial">All, </FONT>
<BR> <FONT SIZE=2 FACE="Arial">I need to run this by everyone and see if someone has any idea's. I have a asterisk server setup and currently am receiving the inbound calling number where the name should be. My setup is....</FONT></P>
<P><FONT SIZE=2 FACE="Arial">One pri terminating into a Cisco 2431 router </FONT>
<BR><FONT SIZE=2 FACE="Arial">Sip messages from the Cisco get sent to a asterisk server</FONT>
<BR><FONT SIZE=2 FACE="Arial">linksys ata's a each remote end. </FONT>
<BR> <FONT SIZE=2 FACE="Arial">I can receive the calling name if the call originates from another extension on the asterisk server, I also can "make" the Cisco send out a generic name to the asterisk sip server and I see the name I statically assign in the Cisco appears on the terminating end (linksys ata)</FONT></P>
<P><FONT SIZE=2 FACE="Arial">I use the command in the Cisco under sip-ua </FONT>
<BR><FONT SIZE=2 FACE="Arial">calling-info pstn-to-sip from name set name</FONT>
<BR><FONT SIZE=2 FACE="Arial">timers buffer-invite 5000</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I have also tried to add the commands...</FONT>
<BR><FONT SIZE=2 FACE="Arial">remote party-id</FONT>
<BR><FONT SIZE=2 FACE="Arial">-voice service voip,sip </FONT>
<BR><FONT SIZE=2 FACE="Arial">ds0-num</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Basically I need to take the field Remote-party id and place it in the sip message "From" </FONT>
<BR><FONT SIZE=2 FACE="Arial">Here is some debug from the sip messages in the Cisco... this is an example of "no caller id Name"</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Sent:</FONT>
<BR><FONT SIZE=2 FACE="Arial">INFO sip:5132017005@65.23.9.xxx:5060 SIP/2.0</FONT>
<BR><FONT SIZE=2 FACE="Arial">Via: SIP/2.0/UDP 66.148.165.xxx:5060;x-ds0num="ISDN 1/0:23 1/0:DS1 1:DS0";bran</FONT>
<BR><FONT SIZE=2 FACE="Arial">From: <sip:5136161824@66.148.165.xxx>;tag=4B0025C-131</FONT>
<BR><FONT SIZE=2 FACE="Arial">To: <sip:5132017005@65.23.9.xxx>;tag=as57cef7cb</FONT>
<BR><FONT SIZE=2 FACE="Arial">Date: Fri, 01 Mar 2002 21:50:43 GMT</FONT>
<BR><FONT SIZE=2 FACE="Arial">Call-ID: 36F777D2-2C9511D6-8065D52A-B58C0139@66.148.165.122</FONT>
<BR><FONT SIZE=2 FACE="Arial">User-Agent: Cisco-SIPGateway/IOS-12.x</FONT>
<BR><FONT SIZE=2 FACE="Arial">Max-Forwards: 70</FONT>
<BR><FONT SIZE=2 FACE="Arial">Timestamp: 1015019445</FONT>
<BR><FONT SIZE=2 FACE="Arial">CSeq: 102 INFO</FONT>
<BR><FONT SIZE=2 FACE="Arial">Contact: <sip:5136161824@66.148.165.xxx:5060></FONT>
<BR><FONT SIZE=2 FACE="Arial">Remote-Party-ID: "WIRELESS CALLER" <sip:66.148.165.xxx>;party=called;screen=no;</FONT>
<BR><FONT SIZE=2 FACE="Arial">Content-Length: 0</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">________________________</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">here is an example of a call with a name and number ( this is forced out by the cisco, for all inbound calls to the ata's )</FONT></P>
<P><FONT SIZE=2 FACE="Arial">*Mar 2 03:56:13.617: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:</FONT>
<BR><FONT SIZE=2 FACE="Arial">Sent:</FONT>
<BR><FONT SIZE=2 FACE="Arial">INFO sip:5132017005@65.23.9.xxx:5060 SIP/2.0</FONT>
<BR><FONT SIZE=2 FACE="Arial">Via: SIP/2.0/UDP 66.148.165.xxx:5060;x-ds0num="ISDN 1/0:23 1/0:DS1 1:DS0";branch=z</FONT>
<BR><FONT SIZE=2 FACE="Arial">From: "Wrking_on_name" <sip:5136161824@66.148.165.xxx>;tag=5FE9C70-BA</FONT>
<BR><FONT SIZE=2 FACE="Arial">To: <sip:5132017005@65.23.9.xxx>;tag=as416d0081</FONT>
<BR><FONT SIZE=2 FACE="Arial">Date: Sat, 02 Mar 2002 03:56:12 GMT</FONT>
<BR><FONT SIZE=2 FACE="Arial">Call-ID: 4559EB3B-2CC811D6-8110D52A-B58C0139@66.148.165.xxx</FONT>
<BR><FONT SIZE=2 FACE="Arial">User-Agent: Cisco-SIPGateway/IOS-12.x</FONT>
<BR><FONT SIZE=2 FACE="Arial">Max-Forwards: 70</FONT>
<BR><FONT SIZE=2 FACE="Arial">Timestamp: 1015041373</FONT>
<BR><FONT SIZE=2 FACE="Arial">CSeq: 102 INFO</FONT>
<BR><FONT SIZE=2 FACE="Arial">Contact: <sip:5136161824@66.148.165.xxx:5060></FONT>
<BR><FONT SIZE=2 FACE="Arial">Remote-Party-ID: "WIRELESS CALLER" <sip:66.148.165.xxx>;party=called;screen=no;priv</FONT>
<BR><FONT SIZE=2 FACE="Arial">Content-Length: 0</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">if you look at the two messages the difference is the FROM message</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">From: <sip:5136161824@66.148.165.xxx>;tag=4B0025C-131 (only name)</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">From: "Wrking_on_name" <sip:5136161824@66.148.165.xxx>;tag=5FE9C70-BA ( name and number ( this is forced out by the cisco, for all inbound calls to the ata's )</FONT></P>
<P><FONT SIZE=2 FACE="Arial">I need to find a way to take the info in the remote party-id and place it in the From field... Any ideas?</FONT>
<BR><FONT SIZE=2 FACE="Arial">below is my cisco config...</FONT>
<BR><FONT SIZE=2 FACE="Arial">the firmware verson is....</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">System image file is "flash:c2430-is-mz.123-11.T8.bin"</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Cisco IAD2431 (R527x) processor (revision 4.0) with 119808K/11264K bytes</FONT>
<BR><FONT SIZE=2 FACE="Arial">Processor board ID FHK0908F2MD</FONT>
<BR><FONT SIZE=2 FACE="Arial">R527x CPU at 225MHz, Implementation 40, Rev 3.1</FONT>
<BR><FONT SIZE=2 FACE="Arial">1 On-Board Eight FXS Analog Voice Module</FONT>
<BR><FONT SIZE=2 FACE="Arial">1 FastEthernet interface</FONT>
<BR><FONT SIZE=2 FACE="Arial">10 Serial interfaces</FONT>
<BR><FONT SIZE=2 FACE="Arial">1 Channelized T1/PRI port</FONT>
<BR><FONT SIZE=2 FACE="Arial">DRAM configuration is 64 bits wide with parity disabled.</FONT>
<BR><FONT SIZE=2 FACE="Arial">63K bytes of non-volatile configuration memory.</FONT>
<BR><FONT SIZE=2 FACE="Arial">System fpga version is 250025</FONT>
<BR><FONT SIZE=2 FACE="Arial">System readonly fpga version is 240024</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">cisco config....</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">hostname 2431_dtci_2_9</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">boot-start-marker</FONT>
<BR><FONT SIZE=2 FACE="Arial">boot-end-marker</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">card type t1 1</FONT>
<BR><FONT SIZE=2 FACE="Arial">enable secret 5 $1$K7c.$PvwV1AKdDLSzj.KZ/QpN8/</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">network-clock-participate T1 1/0</FONT>
<BR><FONT SIZE=2 FACE="Arial">no aaa new-model</FONT>
<BR><FONT SIZE=2 FACE="Arial">ip subnet-zero</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">isdn switch-type primary-ni</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-card 0</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice service voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> fax protocol pass-through g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> modem passthrough nse codec g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> sip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> ds0-num</FONT>
<BR><FONT SIZE=2 FACE="Arial"> header-passing</FONT>
<BR><FONT SIZE=2 FACE="Arial"> registrar server expires max 600 min 60</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 1 g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 2 g711alaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 3 g723ar53</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 4 g723ar63</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 5 g723r53</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 6 g728</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec preference 7 g729r8</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">username nvxcpe privilege 15 secret 5 $1$oAvO$zHweQ8lbhZjzROdYw4psM/</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">controller T1 1/0</FONT>
<BR><FONT SIZE=2 FACE="Arial"> framing esf</FONT>
<BR><FONT SIZE=2 FACE="Arial"> linecode b8zs</FONT>
<BR><FONT SIZE=2 FACE="Arial"> cablelength short 133</FONT>
<BR><FONT SIZE=2 FACE="Arial"> pri-group timeslots 1-8,24</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description WAN</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">interface FastEthernet0/0</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no ip address</FONT>
<BR><FONT SIZE=2 FACE="Arial"> shutdown</FONT>
<BR><FONT SIZE=2 FACE="Arial"> duplex auto</FONT>
<BR><FONT SIZE=2 FACE="Arial"> speed auto</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">interface Serial0/0</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no ip address</FONT>
<BR><FONT SIZE=2 FACE="Arial"> encapsulation frame-relay IETF</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no ip mroute-cache</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no fair-queue</FONT>
<BR><FONT SIZE=2 FACE="Arial"> service-module t1 timeslots 1-24</FONT>
<BR><FONT SIZE=2 FACE="Arial"> frame-relay lmi-type ansi</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">interface Serial0/0.1 point-to-point</FONT>
<BR><FONT SIZE=2 FACE="Arial"> ip address 66.xxx.xxx.xxx255.255.255.252</FONT>
<BR><FONT SIZE=2 FACE="Arial"> frame-relay interface-dlci 100</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">interface Serial1/0:23</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no ip address</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no logging event link-status</FONT>
<BR><FONT SIZE=2 FACE="Arial"> isdn switch-type primary-ni</FONT>
<BR><FONT SIZE=2 FACE="Arial"> isdn incoming-voice voice</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no isdn outgoing display-ie</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no cdp enable</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">ip http server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">ip classless</FONT>
<BR><FONT SIZE=2 FACE="Arial">ip route 0.0.0.0 0.0.0.0 66.xxx.xxx.xxx</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">access-list 52 permit 65.xx.xx.xxx</FONT>
<BR><FONT SIZE=2 FACE="Arial">snmp-server community 3Z8pbXn3 RO 52</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">control-plane</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">call application voice app_transfer flash:current.tcl</FONT>
<BR><FONT SIZE=2 FACE="Arial">call application voice app_transfer max-fwd-cnt 2</FONT>
<BR><FONT SIZE=2 FACE="Arial">call application voice app_transfer language 1 en</FONT>
<BR><FONT SIZE=2 FACE="Arial">call application voice app_transfer set-location en 0 flash:/prompt</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 1/0:23</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description dtci 2x9</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/0</FONT>
<BR><FONT SIZE=2 FACE="Arial"> idle-voltage low</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/1</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/2</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/3</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/4</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/5</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/6</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">voice-port 2/7</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 1 pots</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern .T</FONT>
<BR><FONT SIZE=2 FACE="Arial"> fax rate voice</FONT>
<BR><FONT SIZE=2 FACE="Arial"> direct-inward-dial</FONT>
<BR><FONT SIZE=2 FACE="Arial"> port 1/0:23</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 2017005 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5132017005</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 2017006 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5132017006</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8427005 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138427005</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 2019293 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Brad_line_1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5132019293</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429964 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Brad_line_2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429964</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429971 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Scott_line_1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429972</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429972 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Scott_line_2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429972</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429973 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Kyle_line_1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429973</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429974 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Kyle_line_2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429974</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429975 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429975</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429976 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429976</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429977 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Linksys_ATA_Comm_room_line_1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429977</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429978 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description Linksys_ATA_Comm_room_line_2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429978</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429979 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description NON NAT ATA </FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429979</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 8429980 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> description NAT ATA in comm Room 10.194.41.97</FONT>
<BR><FONT SIZE=2 FACE="Arial"> application app_transfer</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 5138429980</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind setup enable 3</FONT>
<BR><FONT SIZE=2 FACE="Arial"> progress_ind progress enable 8</FONT>
<BR><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">sip-ua</FONT>
<BR><FONT SIZE=2 FACE="Arial"> timers buffer-invite 5000</FONT>
<BR><FONT SIZE=2 FACE="Arial"> sip-server ipv4:65.xxx.xxx.xxx</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">line con 0</FONT>
<BR><FONT SIZE=2 FACE="Arial"> exec-timeout 0 0</FONT>
</P>
<BR>
<P><FONT SIZE=2 FACE="Arial">Any Idea's, I think this is going to be a Cisco problem more than a Asterisk problem, but I thought I would start here.</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Thanks,</FONT>
</P>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<DIV><P><HR>
This email and any attachments ("Message") may contain legally privileged and/or confidential information. If you are not the addressee, or if this Message has been addressed to you in error, you are not authorized to read, copy, or distribute it, and we ask that you please delete it (including all copies) and notify the sender by return email. Delivery of this Message to any person other than the intended recipient(s) shall not be deemed a waiver of confidentiality and/or a privilege.
</P></DIV>
</BODY>
</HTML>