<font face="arial" size="2">I used g729 couple of times in the past and got the warning messages ONLY when I was trying to use more channels than the total amount of licenses I'd got.<br /><br />If you are sure you are using only one device that needs the license, I would suggest to check out how it is communicating with Asterisk. Also, if you have enough time try using the g729 with another soft / IP phone and see if you get the same result.<br /><br />Alyed <br /></font>---------------------------------------------------------------<br /><br />I am not. I have one license and use i channel.<br />It seems to detect the fact there are no more channels left and keeps<br />warning me about it in case I want to use more.<br /><br />It is fine, but the warning is constant. All you see on Asterisk<br />console is running warning message.<br /><br />Rudolf<br /><br />On 4/2/06, Kevin P. Fleming <kpfleming@digium.com>wrote:<br />> RumaTech wrote:<br />><br />> > And it keeps running like that. Call usually come through OK. If i try<br />> > to use "show g729" command, it shows that all codecs are in use. Well,<br />> > this is fine, I am using one, but I do not want to see those warnings.<br />> > Once is quite enough. Those continuos warnings make it impossible to se<br />> > any other asterisk output. How does one turns them off?<br />><br />> You can't make them stop except by not trying to use more channels than<br />> you have licenses for.<br />> _______________________________________________<br />> --Bandwidth and Colocation provided by Easynews.com --<br />><br />> Asterisk-Users mailing list<br />> To UNSUBSCRIBE or update options visit:<br />> http://lists.digium.com/mailman/listinfo/asterisk-users<br />><br />_______________________________________________<br />--Bandwidth and Colocation provided by Easynews.com --<br /><br />Asterisk-Users mailing list<br />To UNSUBSCRIBE or update options visit:<br />http://lists.digium.com/mailman/listinfo/asterisk-users<br /><br /></kpfleming@digium.com>