<HTML><BODY style="word-wrap: break-word; -khtml-nbsp-mode: space; -khtml-line-break: after-white-space; ">I have a issue with two Zap clone cards where they used to work.<DIV><BR class="khtml-block-placeholder"></DIV><DIV>I am using Asterisk@Home 2.5 which includes Asterisk 1.24 and Zaptel drivers 1.2.4. The system is a new Intel Celerion machine. I used to have the same cards running in a Intel PIII system. in this system, they worked. In this older system, I was able to call into the machine and call out from it. Now that I have upgraded the entire box, I cannot figure out why the cards are not working or, more correctly, I cannot place or receive calls on them.</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>First, a bit of background. I have been running this new machine for a few weeks now connecting to the PSTN through an IAX provider. I have some 10 phones connected to Asterisk using several DLink DVG-1120M VOIP "routers". Voicemail, paging, etc. all works. I can call into the IAX trunk and call any phone. I have two POTS lines which I intend to keep - the IAX provider charges by the minutes, thus, I would like to use this connection only as a backup when the POTS lines are in use. The Asterisk system is replacing a Nortel Venture setup. So, I am at the final stage of implementation - get the Zap cards working, sell the Venture phone system.</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>Now, I have installed the drivers, setup the /etc/zapata.conf and /etc/asterisk/zapata-auto.conf, etc. I have configured Asterisk with two trunks Zap/1 and Zap/2. For testing, I have setup asterisk to sent calls with the dialing prefix of 9 to the Zap trunks. When I attempt to place a call, I receive the following message:</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>Mar 5 18:20:29 NOTICE[13927] app_dial.c: Unable to create channel of type 'ZAP' (cause 0 - Unknown)</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>...on both channels. Neither channel even tried to pickup the line. Anyone have any thoughts of where to look?</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>Here are some of details that may be useful:</DIV><DIV>Cards:</DIV><DIV>02:0b.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface</DIV><DIV>02:0c.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>/etc/zaptel.conf:</DIV><DIV># Span 1: WCFXO/0 "Generic Clone Board 1" </DIV><DIV>fxsks=1</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV># Span 2: WCFXO/1 "Generic Clone Board 2" RED </DIV><DIV>fxsks=2</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV># Global data</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>loadzone = us</DIV><DIV>defaultzone = us</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>/etc/asterisk/zatata-auto.conf (as generated by genzapataconf):</DIV><DIV>;</DIV><DIV>callerid=asreceived</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>; Span 1: WCFXO/0 "Generic Clone Board 1" </DIV><DIV>signalling=fxs_ks</DIV><DIV>; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 1</DIV><DIV>context=from-pstn</DIV><DIV>group=0</DIV><DIV>channel => 1</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>; Span 2: WCFXO/1 "Generic Clone Board 2" RED </DIV><DIV>signalling=fxs_ks</DIV><DIV>; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 2</DIV><DIV>context=from-pstn</DIV><DIV>group=0</DIV><DIV>channel => 2</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>zap show status:</DIV><DIV>asterisk2*CLI> zap show status </DIV><DIV>Description Alarms IRQ bpviol CRC4 </DIV><DIV>Generic Clone Board 1 RED 0 0 0 </DIV><DIV>Generic Clone Board 2 RED 0 0 0 </DIV><DIV>ZTDUMMY/1 1 UNCONFIGUR 0 0 0 </DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV><SPAN class="Apple-style-span">(<B>FYI: The Alarms go to OK</B> when the PSTN lines are connected - they were disconnected when I ran this command)</SPAN></DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>zap show channels:</DIV><DIV>sterisk2*CLI> zap show ch</DIV><DIV>channel channels </DIV><DIV>asterisk2*CLI> zap show channels </DIV><DIV> Chan Extension Context Language MusicOnHold </DIV><DIV> pseudo from-pstn en </DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>/extension_additional.conf says:</DIV><DIV>OUT_2 = ZAP/2</DIV><DIV>OUT_1 = ZAP/1</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>(changing these to Zap/1 or zap/1 makes no difference)</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>Anyone have any thoughts on what I am missing? This must be something simple.</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV><DIV><DIV><SPAN class="Apple-style-span" style="border-collapse: separate; border-spacing: 0px 0px; color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: auto; -khtml-text-decorations-in-effect: none; text-indent: 0px; -apple-text-size-adjust: auto; text-transform: none; orphans: 2; white-space: normal; widows: 2; word-spacing: 0px; "><SPAN class="Apple-style-span" style="border-collapse: separate; border-spacing: 0px 0px; color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: auto; -khtml-text-decorations-in-effect: none; text-indent: 0px; -apple-text-size-adjust: auto; text-transform: none; orphans: 2; white-space: normal; widows: 2; word-spacing: 0px; "><SPAN class="Apple-style-span" style="border-collapse: separate; border-spacing: 0px 0px; color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: auto; -khtml-text-decorations-in-effect: none; text-indent: 0px; -apple-text-size-adjust: auto; text-transform: none; orphans: 2; white-space: normal; widows: 2; word-spacing: 0px; "><DIV>Mark Buckaway </DIV><DIV><A href="mailto:mabuckaway@mac.com">mabuckaway@mac.com</A></DIV><DIV><A href="http://homepage.mac.com/mark.buckaway">http://homepage.mac.com/mark.buckaway</A></DIV><DIV>Blog: <A href="http://homepage.mac.com/mark.buckaway/blog">http://homepage.mac.com/mark.buckaway/blog</A></DIV><DIV>---</DIV><DIV><I style="font-style: italic; "><SPAN class="Apple-style-span" style="font-style: italic; "><SPAN class="Apple-style-span" style="font-style: italic; "><SPAN class="Apple-style-span" style="font-style: italic; ">Positive thinking – should never be a substitute for action</SPAN></SPAN></SPAN></I></DIV><BR class="Apple-interchange-newline"></SPAN></SPAN></SPAN> </DIV><BR></DIV></DIV></BODY></HTML>