<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1528" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Hi All,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have installed a Digium TE110P card on an
Asterisk 1.2.1 system. Its connected directly to the PSTN. But I am unable to
make outbound calls on the zap channels. The light on the card is green.
Asterisk CLI shows all 24 channels when I give the command 'zap show channels'.
I also noticed that Asterisk CLI shows an incoming call every few seconds on the
24th channel. This must be some kind of a timing signal. This is he first time I
am configuring a T1 so I must have done something wrong I guess.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>These are the commands I used to load the zap
module:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>modprobe zaptel</FONT></DIV>
<DIV><FONT face=Arial size=2>modprobe wcte11xp</FONT></DIV>
<DIV><FONT face=Arial size=2>ztcfg -vvv</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>---------------------------</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>my <STRONG>zaptel.conf </STRONG>is as
follows:</FONT></DIV>
<DIV><STRONG><FONT face=Arial size=2></FONT></STRONG> </DIV>
<DIV><FONT face=Arial size=2>span=1,1,0,esf,b8zs<BR>e&m=1-24<BR>loadzone =
us<BR>defaultzone=us<BR></FONT></DIV>
<DIV><FONT face=Arial size=2>--------------------------</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>the <STRONG>zapata.conf</STRONG> is as
follows:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>[trunkgroups]<BR>[channels]</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>group=1<BR>language=en<BR>signalling=em_w<BR>usecallerid=yes<BR>callerid=asreceived<BR>context=default<BR>echocancel=64<BR>echocancelwhenbridged=yes<BR>rxgain=1.0<BR>txgain=1.0<BR>channel
=>
1-2<BR>group=2<BR>language=en<BR>signalling=em_w<BR>usecallerid=yes<BR>callerid=asreceived<BR>context=default<BR>echocancel=64<BR>echocancelwhenbridged=yes<BR>rxgain=1.0<BR>txgain=1.0<BR>channel
=> 3-24<BR></FONT></DIV>
<DIV><FONT face=Arial size=2>----------------------------------</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>In <STRONG>extensions.conf</STRONG> i have
specified the following line:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>[default]</FONT></DIV>
<DIV><FONT face=Arial size=2>exten =>
_ZXXXXXXXXX,1,Dial(zap/g1/${EXTEN},15,tr)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>----------------------</FONT></DIV>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>When I try to dial using the T1 line I
get the following error :</FONT></DIV>
<DIV> </DIV></FONT></DIV>
<DIV><FONT face=Arial size=2><STRONG>Feb 24 06:56:53 NOTICE[5724]:
app_dial.c:1010 dial_exec_full: Unable to create channel of type 'Zap' (cause 0
- Unknown)<BR> == Everyone is busy/congested at this time
(1:0/0/1)<BR> == Auto fallthrough, channel 'SIP/7180-a103' status is
'CHANUNAVAIL'<BR></STRONG></DIV></FONT>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any ideas guys?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks and regards,</FONT></DIV>
<DIV><FONT face=Arial size=2>Nitin
Joshi.</DIV></FONT></FONT></DIV></BODY></HTML>