<DIV id=RTEContent>Hello,</DIV>  <DIV>&nbsp;</DIV>  <DIV>We are building a conference server using a Dell PE 2850 3GHz with 2G memory. </DIV>  <DIV>&nbsp;</DIV>  <DIV>This conference server will be used to hold a large conference with 30-50 simultaneous users in a conference room. This large conference will take place two days per week for 3 hours each day. When a large conference is going on, no other conference room will be created.</DIV>  <DIV>&nbsp;</DIV>  <DIV>The rest of the week, several small conferences will take place (5-10 simultaneous users) using 5-10 conference rooms.</DIV>  <DIV>&nbsp;</DIV>  <DIV>Is the Dell PE 2850 3GHz with 2G memory up to the task? If not, will adding another processor solve it?</DIV>  <DIV>&nbsp;</DIV>  <DIV>These entries from the dimensioning portion of the Wiki gives me hope that id does</DIV>  <DIV><A href="http://www.voip-info.org/wiki/view/Asterisk+dimensioning">http://www.voip-info.org/wiki/view/Asterisk+dimensioning</A></DIV> 
 <DIV>&nbsp;</DIV>  <DIV>  <LI>Capacity of <B>MeetMe</B>: With <B>28 persons</B> on a Pentium II, 300MHz, 128 MB vmstat shows 70% idle.   <LI>"I have anywhere from 15, to a peak max of <B>30</B> traders all using the same <B>meetme conf</B> during the day. My * is running on a old 4U 500Mhz machine (dual board, one processor installed now). With the exception of of a few problems from software sip phones, our implementation has been relatively problem free.</LI></DIV>  <div>&nbsp;</div>  <div>I just want to get more opinions from others especially those who have built conferencing servers recently.</div>  <div>&nbsp;</div>  <div>Thank you very much.</div>  <div>&nbsp;</div>  <div>richard</div>  <div>&nbsp;</div>  <DIV>&nbsp;&nbsp; </DIV>