<div>I've talked to the carrier (verizon), what they said is that the call is not leaving my phone equipment. I tried to tell him that I'm getting an error back from his system, but he insists that the channel never comes up. Their answers was "talk to your telco vendor, its on their end". So I guess I'm pretty much SOL when it comes to using 911 with the PRI.
</div>
<div> </div>
<div>Below is the debug, they wanted me to try all the DID numbers to see if it worked on any of them (40 numbers) and the billing number, wouldn't work with any of them. </div>
<div> </div>
<div><br> -- Executing SetCallerID("IAX2/sycam-16384", "8157548823") in new stack<br> -- Executing Dial("IAX2/sycam-16384", "Zap/g2/911") in new stack<br>-- Making new call for cr 33385
<br> -- Requested transfer capability: 0x00 - SPEECH<br>> Protocol Discriminator: Q.931 (8) len=39<br>> Call Ref: len= 2 (reference 617/0x269) (Originator)<br>> Message type: SETUP (5)<br>> [04 03 80 90 a2]
<br>> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)<br>> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>> Ext: 1 User information layer 1: u-Law (34)
<br>> [18 03 a9 83 81]<br>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0<br>> ChanSel: Reserved<br>> Ext: 1 Coding: 0 Number Specified Channel Type: 3
<br>> Ext: 1 Channel: 1 ]<br>> [1e 02 80 83]I><br>> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)<br>> Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
<br>> [6c 0c 41 80 38 31 35 37 35 34 38 38 32 33]<br>> Calling Number (len=14) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)<br>> Presentation: Presentation permitted, user number not screened (0) '8157548823' ]
<br>> [70 04 a1 39 31 31]<br>> Called Number (len= 6) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '911' ]<br> -- Called g2/911<br>< Protocol Discriminator: Q.931 (8) len=9
<br>< Call Ref: len= 2 (reference 617/0x269) (Terminator)<br>< Message type: RELEASE COMPLETE (90)<br>< [08 02 82 9c]<br>< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2)
<br>< Ext: 1 Cause: Invalid number format (28), class = Normal Event (1) ]<br>-- Processing IE 8 (cs0, Cause)<br> -- Channel 0/1, span 2 got hangup<br>NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
<br>NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null<br> -- Hungup 'Zap/25-1'<br><br> </div>
<div><span class="gmail_quote">On 2/8/06, <b class="gmail_sendername">Watkins, Bradley</b> <<a href="mailto:Bradley.Watkins@compuware.com">Bradley.Watkins@compuware.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div><span><font face="Arial" color="#0000ff" size="2">It looks like the outbound caller ID is not being set properly. Most of the carriers that I've dealt with will act exactly as you said if you do not set it to what is expected at the 911 center.
</font></span></div>
<div><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div><span><font face="Arial" color="#0000ff" size="2">In particular:</font></span></div><span class="q">
<div><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div><span>> Calling Number (len= 8) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)<br>> Presentation: Presentation permitted, user number not screened (0) '3251' ]
</span></div>
<div><span></span> </div></span>
<div><span><font face="Arial" color="#0000ff" size="2">Your user number being sent is just the caller ID of the SIP channel.</font></span></div>
<div><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div><span><font face="Arial" color="#0000ff" size="2">Regards,</font></span></div>
<div><span><font face="Arial" color="#0000ff" size="2">- Brad</font></span></div>
<blockquote style="MARGIN-RIGHT: 0px">
<div></div>
<div lang="en-us" dir="ltr" align="left"><font face="Tahoma" size="2"><span class="q">-----Original Message-----<br><b>From:</b> <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:asterisk-users-bounces@lists.digium.com" target="_blank">
asterisk-users-bounces@lists.digium.com</a> [mailto:<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:asterisk-users-bounces@lists.digium.com" target="_blank">asterisk-users-bounces@lists.digium.com</a>
] <b>On Behalf Of </b>Joe Pukepail<br></span>
<div><span class="e" id="q_109495cc6d9f12b5_4"><b>Sent:</b> Tuesday, February 07, 2006 3:26 PM<br><b>To:</b> Asterisk Users Mailing List - Non-Commercial Discussion<br><b>Subject:</b> Re: [Asterisk-Users] 911 and ISDN PRI
<br><br></span></div></font></div>
<div><span class="e" id="q_109495cc6d9f12b5_6">
<div>I have a call in with the carrier, below is the PRI debug, looks like it is getting hungup because of "Invalid Number format", I did try to use Setcallerid to change the callerID to a DID number in a previous attempt, but it still didn't go through. Not sure if that "invalid number format" is the calling number or the number I'm calling. I'll let the list know the result.
</div>
<div> </div>
<div>I would encourage everyone to test their 911 functionality (especially if you have a PRI), I almost didn't check it. The PRI is up and 411 works, so I almost assumed that 911 would work. Make sure you call the police station first to make sure they are not swamped by real emergency calls and let them know you are testing .
</div>
<div> </div>
<div><br> -- Executing NoOp("SIP/3251-7316", "3251") in new stack<br> -- Executing Dial("SIP/3251-7316", "Zap/g2/911") in new stack<br>-- Making new call for cr 33144<br> -- Requested transfer capability: 0x00 - SPEECH
<br>> Protocol Discriminator: Q.931 (8) len=44<br>> Call Ref: len= 2 (reference 376/0x178) (Originator)<br>> Message type: SETUP (5)<br>> [04 03 80 90 a2]<br>> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
<br>> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)<br>> Ext: 1 User information layer 1: u-Law (34)<br>> [18 03 a9 83 81]<br>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
<br>> ChanSel: Reserved<br>> Ext: 1 Coding: 0 Number Specified Channel Type: 3<br>> Ext: 1 Channel: 1 ]<br>> [1e 02 80 83]I><br>> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
<br>> Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]<br>> [28 09 b1 52 65 63 70 74 69 6f 6e]<br>> Display (len= 9) Charset: 31 [ Recption ]<br>> [6c 06 41 80 33 32 35 31]
<br>> Calling Number (len= 8) [ Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)<br>> Presentation: Presentation permitted, user number not screened (0) '3251' ]
<br>> [70 04 a1 39 31 31]<br>> Called Number (len= 6) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '911' ]<br> -- Called g2/911<br>< Protocol Discriminator: Q.931 (8) len=9
<br>< Call Ref: len= 2 (reference 376/0x178) (Terminator)<br>< Message type: RELEASE COMPLETE (90)<br>< [08 02 82 9c]<br>< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2)
<br>< Ext: 1 Cause: Invalid number format (28), class = Normal Event (1) ]<br>-- Processing IE 8 (cs0, Cause)<br> -- Channel 0/1, span 2 got hangup</div>
<div> </div>
<div><br><br> </div>
<div><span class="gmail_quote">On 2/7/06, <b class="gmail_sendername">Mark Phillips</b> <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:g7ltt@g7ltt.com" target="_blank">g7ltt@g7ltt.com</a>> wrote:
</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">I dunno about your provider but I know that 2 of my 3 MCI PRI circuits<br>have no 911 abilities. MCI tells me this is becasue I have no local
<br>dialing plan on them.<br><br>Mark, G7LTT/KC2ENI<br>Randolph, NJ<br><a onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.g7ltt.com/" target="_blank">http://www.g7ltt.com</a><br><br><br>Michael Collins wrote:
<br>> 911 **should** work on a PRI. If you are getting a hangup and you don't <br>> see a valid hangupcause, it might be best to get your carrier on the<br>> line and have them monitor the circuit while you dial 911. They might
<br>> be able to tell you what the problem is.<br>><br>> <br>><br>> -MC<br>><br>><br>><br>> ------------------------------------------------------------------------<br>><br>> *From:* <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:asterisk-users-bounces@lists.digium.com" target="_blank">
asterisk-users-bounces@lists.digium.com </a><br>> [mailto:<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:asterisk-users-bounces@lists.digium.com" target="_blank">asterisk-users-bounces@lists.digium.com
</a>] *On Behalf Of *Joe Pukepail<br>> *Sent:* Tuesday, February 07, 2006 10:10 AM<br>> *To:* Asterisk Users Mailing List - Non-Commercial Discussion <br>> *Subject:* [Asterisk-Users] 911 and ISDN PRI<br>><br>
><br>><br>> Does asterisk support this? I have a location that I planned to only<br>> put a PRI line, but testing 911 (I called them first), I just get a <br>> hangup. Does 911 normally work over a PRI line? Anything special I
<br>> have to setup in asterisk?<br>><br>><br>> ------------------------------------------------------------------------<br>><br>> _______________________________________________<br>> --Bandwidth and Colocation provided by
<a onclick="return top.js.OpenExtLink(window,event,this)" href="http://easynews.com/" target="_blank">Easynews.com</a> --<br>><br>> Asterisk-Users mailing list<br>> To UNSUBSCRIBE or update options visit: <br>>
<a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br>_______________________________________________
<br>--Bandwidth and Colocation provided by <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://easynews.com/" target="_blank">Easynews.com</a> --<br><br>Asterisk-Users mailing list<br>To UNSUBSCRIBE or update options visit:
<br> <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-users </a><br></blockquote></div>
<br></span></div></blockquote><br><br><br>
<p><b><font face="Arial" size="2">The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.
</font></b> </p><br><br>_______________________________________________<br>--Bandwidth and Colocation provided by <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://easynews.com/" target="_blank">Easynews.com
</a> --<br><br>Asterisk-Users mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-users" target="_blank">
http://lists.digium.com/mailman/listinfo/asterisk-users</a><br><br><br></blockquote></div><br>