I recenlty upgraded to 1.2.x (not quite sure which version, whatever it is I downloaded it on 1/30/06.)<br>
<br>
At the time of the upgrade, I had a Nufone toll-free number going into
my IVR.&nbsp; Extension 2000 rang the Cisco phone on my desk, and the
caller id came through just fine.<br>
<br>
As soon as the upgrade was in place, the caller ID now says &quot;unknown&quot;
in both fields (name and number.)&nbsp; I made no changes to the
dialpan after the upgrade.<br>
<br>
As a test, I changed the dialplan so when the extension was dialled it
would dial the Cisco, a Sipura SIP phone at another location, and an
iaxy at another location.&nbsp; The incoming caller id on both SIP
devices says &quot;unknown&quot;, but the iaxy has the proper caller id.&nbsp; I
also know that nufone is delivering the caller id because I have some
alternative routings in the dialplan for that incoming number based on
the caller id of the calling party and the system does the proper
routing based on the incoming caller id.<br>
<br>
By way of illustration, the following line in the dialplan results in
the iaxy displaying the caller id, and the 2 sip devices displaying
&quot;unknown&quot;:<br>
<br>
exten =&gt; 2000,1,Dial(SIP/2000&amp;SIP/2100&amp;iax2/iaxy2,15).<br>
<br>
One more thing - I have a teliax toll-free number that goes into the
same IVR, and the caller id is passed to the SIP devices without
trouble.&nbsp; I want to utilize the nufone number, however, because
the call quality is better (not ot mention 1 cent per minute cheaper
than teliax.)<br>
<br>
Any idea how I can get the caller id to show on the SIP devices for the nufone incoming line?<br>
<br>
Robert<br>