Hi all,<br>
<br>
I have just installed Asterisk 1.2.1 on my server and I'm having a problem with the X100 Zap channel.<br>
<br>
The channel works for a while when I boot up the server and then degrades to an garbled dial tone and speach.<br>
Also this problem will appear when I reload the Asterisk config files. My SIP and IAX channels are working fine.<br>
<br>
In the logs file I get <br>
<br>
Dec 26 21:05:22 WARNING[2377] chan_zap.c: Ignoring signalling<br>
Dec 26 21:05:22 WARNING[2377] chan_zap.c: Ignoring overlapdial<br>
<br>
when reloading the configs and<br>
<br>
Dec 26 21:05:41 NOTICE[2577] callerid.c: Caller*ID failed checksum<br>
Dec 26 21:05:44 NOTICE[2577] chan_zap.c: Got event 18 (Ring Begin)...<br>
<br>
when a call comes in on the Zap channel<br>
<br>
At bootup of Asterisk, these do not appear in the logs, only after a reload<br>
<br>
<br>
included zapata.conf <br>
[trunkgroups]<br>
<br>
[channels]<br>
language=en<br>
context=incoming<br>
signalling=fxs_ks<br>
channel => 1<br>
usecallerid=yes<br>
echocancel=yes<br>
musiconhold=default<br>
immediate=no<br>
overlapdial=yes<br>
relaxdtmf=yes<br>
echotraining=yes<br>
rxgain=100%<br>
txgain=50%<br>
<br>
<br>
and zaptel.conf<br>
<br>
loadzone = us<br>
defaultzone=us<br>
fxsks=1<br>
<br>
<br>
Any insight into resolving this would be appricated,<br>
<br>
Regards,<br>
<br>
Todd Reese<br>
<br>
<br>
<br>