<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
This depends on the type of signalling you use!<br>
<br>
ISDN uses only 1 D channel that is chan 16 for EuroISDN. All other
variants of ISDN (Q.Sig, 1TR, DPNSS, PSS1 etc) I know do the same.
SS7/C7 is a different story as they can use up to 30 'links', but the
most common is actually still 1 link at channel 16.<br>
<br>
jvb<br>
Andrew Latham wrote:
<blockquote
 cite="midc39c115d0512070445k61fdbd0eu52d8034c846e4d19@mail.gmail.com"
 type="cite">
  <pre wrap="">If I remember correctly an E1 has two D-Channels. Check your notes on
what channels 31, 32 really do.....

On 12/7/05, Laszlo Megyer <a class="moz-txt-link-rfc2396E" href="mailto:laszlo.megyer@gmail.com">&lt;laszlo.megyer@gmail.com&gt;</a> wrote:
  </pre>
  <blockquote type="cite">
    <pre wrap="">Hey folks,

I have my linuxbox connected to a PBX through a digium te110p card, E1 line.
The asterisk is set up to be the timing master for the line.

recently run into the following error message when starting asterisk:

The message:
---------
  == Primary D-Channel on span 1 down
Dec  7 11:34:02 WARNING[1105]: chan_zap.c:2282 pri_find_dchan: No
D-channels available!  Using Primary channel 16 as D-channel anyway!
  == Primary D-Channel on span 1 up

Also the yellow alarm is not cleared on the PBX side. Any
recommendations for the problem?


Or should I use Tie-line connection between the PBX and asterisk somehow?

thanks,
lez

config files follow:



my /etc/zaptel.conf:
-------------------8&lt;-----------
span=1,0,0,ccs,hdb3
bchan=1-15,17-31
dchan=16

my /etc/asterisk/zapata.conf:
----------------8&lt;-------------------
[trunkgroups]

[channels]

spanmap =&gt; 1,1,1

usecallerid=yes
hidecallerid=no
language=en
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
callreturn=yes

rxgain=0.0
txgain=0.0

callgroup=1
pickupgroup=1

immediate=no


; LOCAL CONFIGS:
context = internal

signalling = pri_net
group = 1;
channel =&gt; 1-15,17-31

switchtype = national
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   <a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>

    </pre>
  </blockquote>
  <pre wrap=""><!---->

--
---
Andrew Latham - AKA: LATHAMA (lay-th-ham-eh)
<a class="moz-txt-link-abbreviated" href="mailto:lathama@lathama.com">lathama@lathama.com</a> - <a class="moz-txt-link-abbreviated" href="mailto:lathama@yahoo.com">lathama@yahoo.com</a> - <a class="moz-txt-link-abbreviated" href="mailto:lathama@gmail.com">lathama@gmail.com</a>
If any of the above are down we have bigger problems than my email!
---
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   <a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>



  </pre>
</blockquote>
<br>
</body>
</html>