<div><br>I just wanted to say thanks to everything that provided feedback and assistance on this. I have AAH2.1 running with my Sangoma T1 card. Here's a few of the gotchas I ran into and my process, please note I'm not an asterisk expert and this could be totally wrong but here's what worked for me:
</div>
<div> </div>
<div>1. you have to compile and install the sangoma files, there's a doc wiki at <a href="http://sangoma.editme.com">sangoma.editme.com</a> that should help</div>
<div>2. you have to remove ztdummy from the start up modules. I don't know the most elegant way to do this but I edited /etc/init.d/zaptel and commented out the line that loads it</div>
<div>3. you have to configure the sangoma card using wancfg (very important)</div>
<div>4. edit the etc/zaptel.conf and etc/asterisk/zapata.conf files</div>
<div> </div>
<div>That's it so far... </div>
<div> </div>
<div>Jess</div>