<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=windows-1250"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Is this standard in the industry? My local telco in the US wants
$1050/month for T1 (not PRI!) I can buy 24 POTS lines for $840/month.
Gotta love small towns!<br>
<br>
BEN<br>
<br>
Sean Cook wrote:
<blockquote cite="mid20050909033257.9678C3C1D0@lists.digium.com"
type="cite">
<pre wrap="">Not sure about where you are but 16 pots lines generally run about $25-$30 /
month = $480/month. For about $400/month I can get a PRI (23+1) and go
straight into a TE100.
Just a thought.
Sean
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a>
[<a class="moz-txt-link-freetext" href="mailto:asterisk-users-bounces@lists.digium.com">mailto:asterisk-users-bounces@lists.digium.com</a>] On Behalf Of Erick Perez
Sent: Thursday, September 08, 2005 11:04 PM
To: Damon Estep
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Solution for 12 to 16 FXO to asterisk
connection
cant find a cisco one so far.
So what i need is a voip gateway?
i found the octtel sp1632 for about USD.1500
<a class="moz-txt-link-freetext" href="http://www.octtel.com.tw/eng/product_1632_2.php">http://www.octtel.com.tw/eng/product_1632_2.php</a>
so i configure the equipment to register with the asterisk? as sip? or
some other thing? it will only be used to make outgoing calls, the
config is like this
nortel (12 port pstn card)----->(device with
16fxo)----->asterisk----->voip_provider
no chance to use an e1/t1 on the nortel.
On 9/8/05, Damon Estep <a class="moz-txt-link-rfc2396E" href="mailto:damon@suburbanbroadband.net"><damon@suburbanbroadband.net></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">How about a used cisco iad2400 with a 16fxo module? Check ebay - no t1
card required. Probably $1000
</pre>
<blockquote type="cite">
<pre wrap="">-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a> [<a class="moz-txt-link-freetext" href="mailto:asterisk-users">mailto:asterisk-users</a>-
<a class="moz-txt-link-abbreviated" href="mailto:bounces@lists.digium.com">bounces@lists.digium.com</a>] On Behalf Of Erick Perez
Sent: Thursday, September 08, 2005 8:27 PM
To: <a class="moz-txt-link-abbreviated" href="mailto:asterisk-users@lists.digium.com">asterisk-users@lists.digium.com</a>
Subject: [Asterisk-Users] Solution for 12 to 16 FXO to asterisk
</pre>
</blockquote>
<pre wrap="">connection
</pre>
<blockquote type="cite">
<pre wrap="">Hi, today a customer asked how to use asterisk with 12 to 16 FXO
ports. I can use a channel bank with 16 FXO ports and connect the
channel bank with a T1 cable to a T1 card in the Asterisk Server.
Asterisk will then send the calls to the Voip provider over the
internet.
However a 16 fxo port channel bank is about USD 1500 + a t1 card USD
500 + a USD 1000 computer = 3 thousand us dollars + my installation
fees (life isn't free).
Sounds expensive for such a small install.
Suggestions?
--
-------------------------------------------
Erick Perez
Linux User 376588
<a class="moz-txt-link-freetext" href="http://counter.li.org/">http://counter.li.org/</a> (Get counted!!!)
Panama, Republic of Panama
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
To UNSUBSCRIBE or update options visit:
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
</pre>
</blockquote>
</blockquote>
<pre wrap=""><!---->
</pre>
</blockquote>
</body>
</html>