<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Dana Olson wrote:
<blockquote cite="mid55a62b210509020749313ae4f8@mail.gmail.com"
type="cite"><br>
Chris,<br>
<br>
Thanks for the reply.<br>
<br>
I checked those settings, and they were commented out, so I uncommented
them. I assumed you meant rtnoupdate=yes, so that's what I put, but
that didn't work. I tried rtnoupdate=no, and that didn't work either.<br>
<br>
I do have a register statement in my iax.conf, and that works - I can
get my inbound calls no problem.<br>
<br>
Dana<br>
<pre wrap="">
<hr size="4" width="90%"></pre>
</blockquote>
<br>
Actually, the current CVS Head usage is rtupdate=<yes|no>, it was
changed from rtnoupdate=<yes|no> not too long ago. If you are
using 1.2 I'm not sure which is correct. I went through this battle of
getting this to work the beginning of this week, and the four settings
I listed in my last post made all the difference.<br>
<br>
-Chris<br>
</body>
</html>