<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1505" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I have a TE410P with two real Telco T1's and the
other 2 ports terminate into an in-house voice mail/IVR system. Calls
arrive from Telco are routed to the appropriate in-house system based on the DID
Digits. This part works perfectly.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Now I what to allow the in-house VMS to dial though
asterisk to the Telco T1's. The VMS complains there is no dial tone on its
T1 and drops the attempt. I could disable dial tone detection, but rather
not. Instead, I would like asterisk to provide a dial tone after the trunk
has been seized.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>These T1's are all the same - D4, AMI, SF E&M
Wink Start.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any Ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Bart</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>