<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<TITLE>Message</TITLE>
<META content="MSHTML 6.00.2900.2668" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=727151114-26072005><FONT face=Arial color=#0000ff size=2>I
believe you have to upgrade to 5.3 in order to go from unsigned to signed
executables. Once you're at 5.3, you can go directly to 7.5. I did
this recently with a couple of 7960s I had in the lab and it worked
perfectly.</FONT></SPAN></DIV>
<DIV><SPAN class=727151114-26072005><FONT face=Arial color=#0000ff
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=727151114-26072005><FONT face=Arial color=#0000ff
size=2>Regards,</FONT></SPAN></DIV>
<DIV><SPAN class=727151114-26072005><FONT face=Arial color=#0000ff size=2>-
Brad</FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV></DIV>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left><FONT
face=Tahoma size=2>-----Original Message-----<BR><B>From:</B>
asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] <B>On Behalf Of </B>Walid
Azab<BR><B>Sent:</B> Tuesday, July 26, 2005 10:29 AM<BR><B>To:</B> 'Asterisk
Users Mailing List - Non-Commercial Discussion'<BR><B>Subject:</B>
[Asterisk-Users] 7960 SIP Firmware Upgrade Strange
Problem<BR><BR></FONT></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2>Hi,</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>I am upgrading a
Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to
7.5</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>However in my
first attempt to go from V.5.1 to 6.0 this is hat happens:</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>- The phone
reboots</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>- The phone then
reads the file OS79XX.TXT from the TFP server. In the file I added the
version "P0S3-06-0-00"</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>- It starts
upgrading firmware</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>- Then I get the
following message: (Upgrade Failed - Unauthorized)</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial size=2>Any ideas? Please
find below my conf files.</FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2><STRONG>SIP.CONF</STRONG></FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2>[300]<BR>username=300<BR>type=friend<BR>secret=cisco<BR>record_out=On-Demand<BR>record_in=On-Demand<BR>qualify=no<BR>port=5060<BR>nat=never<BR><A
href="mailto:mailbox=300@default">mailbox=300@default</A><BR>host=dynamic<BR>dtmfmode=rfc2833<BR>context=from-internal<BR>canreinvite=no<BR>callerid=""
<300></FONT></SPAN></DIV>
<DIV><SPAN class=796312014-26072005><FONT face=Arial
size=2></FONT></SPAN> </DIV><SPAN class=796312014-26072005><FONT
face=Arial size=2>
<DIV><STRONG>SIP000CCE351C07.cnf</STRONG><BR># SIP Configuration Generic File
(start)</DIV>
<DIV> </DIV>
<DIV># Line 1 Settings<BR>line1_name:
"300"
; Line 1 Extension\User ID<BR>line1_displayname:
"300" ; Line 1
Display Name<BR>line1_authname:
"300" ; Line 1 Registration
Authentication<BR>line1_password:
"cisco" ; Line 1 Registration
Password</DIV>
<DIV> </DIV>
<DIV># Line 2 Settings<BR>line2_name:
""
; Line 2 Extension\User ID<BR>line2_displayname:
""
; Line 2 Display Name<BR>line2_authname:
"UNPROVISIONED" ; Line 2
Registration Authentication<BR>line2_password:
"UNPROVISIONED" ; Line 2
Registration Password</DIV>
<DIV> </DIV>
<DIV># Line 3 Settings<BR>line3_name:
""
; Line 3 Extension\User ID<BR>line3_displayname:
""
; Line 3 Display Name<BR>line3_authname:
"UNPROVISIONED" ; Line 3
Registration Authentication<BR>line3_password:
"UNPROVISIONED" ; Line 3
Registration Password</DIV>
<DIV> </DIV>
<DIV># Line 4 Settings<BR>line4_name:
""
; Line 4 Extension\User ID<BR>line4_displayname:
""
; Line 4 Display Name<BR>line4_authname:
"UNPROVISIONED" ; Line 4
Registration Authentication<BR>line4_password:
"UNPROVISIONED" ; Line 4
Registration Password</DIV>
<DIV> </DIV>
<DIV># Line 5 Settings<BR>line5_name:
""
; Line 5 Extension\User ID<BR>line5_displayname:
""
; Line 5 Display Name<BR>line5_authname:
"UNPROVISIONED" ; Line 5
Registration Authentication<BR>line5_password:
"UNPROVISIONED" ; Line 5
Registration Password</DIV>
<DIV> </DIV>
<DIV># Line 6 Settings<BR>line6_name:
""
; Line 6 Extension\User ID<BR>line6_displayname:
""
; Line 6 Display Name<BR>line6_authname:
"UNPROVISIONED" ; Line 6
Registration Authentication<BR>line6_password:
"UNPROVISIONED" ; Line 6
Registration Password</DIV>
<DIV> </DIV>
<DIV># NAT/Firewall Traversal<BR>nat_address: ""<BR>voip_control_port:
"5060"<BR>start_media_port: "16384"<BR>end_media_port: "32766"</DIV>
<DIV> </DIV>
<DIV><BR># Phone Label (Text desired to be displayed in upper right
corner)<BR>phone_label:
"WaZaB-SIP"
; Has no effect on SIP messaging</DIV>
<DIV> </DIV>
<DIV># Time Zone phone will reside in<BR>time_zone: EST</DIV>
<DIV> </DIV>
<DIV># Phone prompt/password for telnet/console session<BR>phone_prompt:
"Cisco7960"
; Telnet/Console Prompt<BR>phone_password:
"abc"
; Telnet/Console Password</DIV>
<DIV> </DIV>
<DIV># SIP Configuration Generic File (stop)<BR></DIV>
<DIV><STRONG>SIPDefault.cnf</STRONG></DIV>
<DIV># Image Version<BR>image_version: "P0S3-06-0-00"</DIV>
<DIV> </DIV>
<DIV># Proxy Server<BR>proxy1_address: "10.150.200.165"<BR> <BR># Proxy
Server Port (default - 5060)<BR>proxy1_port:"5060"</DIV>
<DIV> </DIV>
<DIV># Emergency Proxy info<BR>proxy_emergency:
"10.150.200.165"<BR>proxy_emergency_port: "5060"</DIV>
<DIV> </DIV>
<DIV># Backup Proxy info<BR>proxy_backup:
"10.150.200.165"<BR>proxy_backup_port: "5060"<BR> <BR># Outbound Proxy
info<BR>outbound_proxy: ""<BR>outbound_proxy_port: "5060"<BR> <BR>#
NAT/Firewall Traversal<BR>nat_enable: "0"<BR>nat_address:
""<BR>voip_control_port: "5061"<BR>start_media_port:
"16384"<BR>end_media_port: "32766"<BR>nat_received_processing: "0"</DIV>
<DIV> </DIV>
<DIV># Proxy Registration (0-disable (default), 1-enable)<BR>proxy_register:
"1"<BR> <BR># Phone Registration Expiration [1-3932100 sec] (Default -
3600)<BR>timer_register_expires: "3600"<BR> <BR># Codec for media stream
(g711ulaw (default), g711alaw, g729)<BR>preferred_codec: "none"<BR> <BR>#
TOS bits in media stream [0-5] (Default - 5)<BR>tos_media: "5"</DIV>
<DIV> </DIV>
<DIV># Enable VAD (0-disable (default), 1-enable)<BR>enable_vad:
"0"<BR> <BR># Allow for the bridge on a 3way call to join remaining
parties upon hangup<BR>cnf_join_enable: "1" ;
0-Disabled, 1-Enabled (default)<BR> <BR># Allow Transfer to be completed
while target phone is still ringing<BR>semi_attended_transfer: "0"
; 0-Disabled, 1-Enabled (default)<BR> <BR># Telnet Level (enable or
disable the ability to telnet into this phone <BR>telnet_level:
"2" ; 0-Disabled (default), 1-Enabled,
2-Privileged</DIV>
<DIV> </DIV>
<DIV># Inband DTMF Settings (0-disable, 1-enable (default))<BR>dtmf_inband:
"1"<BR> <BR># Out of band DTMF Settings (none-disable, avt-avt enable
(default), avt_always - always avt )<BR>dtmf_outofband: "avt"<BR> <BR>#
DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up,
5-6dB up)<BR>dtmf_db_level: "3"<BR> <BR># SIP Timers<BR>timer_t1:
"500"
; Default 500 msec<BR>timer_t2:
"4000"
; Default 4 sec<BR>sip_retx:
"10"
; Default 11<BR>sip_invite_retx:
"6"
; Default 7<BR>timer_invite_expires:
"180" ; Default 180
sec<BR> <BR># Setting for Message speeddial to UOne box<BR>messages_uri:
"*97"</DIV>
<DIV> </DIV>
<DIV># TFTP Phone Specific Configuration File Directory<BR>tftp_cfg_dir:
"./"<BR> <BR># Time Server<BR>sntp_mode: "unicast"<BR>sntp_server:
"10.150.200.165"<BR>time_zone: "EST"<BR>dst_offset: "1"<BR>dst_start_month:
"April"<BR>dst_start_day: ""<BR>dst_start_day_of_week:
"Sun"<BR>dst_start_week_of_month: "1"<BR>dst_start_time:
"02"<BR>dst_stop_month: "Oct"<BR>dst_stop_day: ""<BR>dst_stop_day_of_week:
"Sunday"<BR>dst_stop_week_of_month: "8"<BR>dst_stop_time:
"2"<BR>dst_auto_adjust: "1"<BR> <BR># Do Not Disturb Control (0-off,
1-on, 2-off with no user control, 3-on with no user control)<BR>dnd_control:
"0"
; Default 0 (Do Not Disturb feature is off)<BR> <BR># Caller ID Blocking
(0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user
control)<BR>callerid_blocking:
"0" ;
Default 0 (Disable sending all calls as anonymous)<BR> <BR># Anonymous
Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no
user control)<BR>anonymous_call_block:
"0" ; Default 0 (Disable
blocking of anonymous calls)<BR> <BR># Call Waiting (0-disabled,
1-enabled, 2-disabled with no user control, 3-enabled with no user
control)<BR>call_waiting:
"1"
; Default 1 (Call Waiting enabled)</DIV>
<DIV> </DIV>
<DIV># DTMF AVT Payload (Dynamic payload range for AVT tones -
96-127)<BR>dtmf_avt_payload:
"101" ; Default
100<BR> <BR># XML file that specifies the dialplan
desired<BR>dial_template: "dialplan"</DIV>
<DIV> </DIV>
<DIV># Network Media Type (auto, full100, full10, half100,
half10)<BR>network_media_type: "auto"</DIV>
<DIV> </DIV>
<DIV>#Autocompletion During Dial (0-off, 1-on [default])<BR>autocomplete:
"1"</DIV>
<DIV> </DIV>
<DIV>#Time Format (0-12hr, 1-24hr [default])<BR>time_format_24hr: "0"</DIV>
<DIV> </DIV>
<DIV># URL for external Phone Services<BR>services_url: "<A
href="http://10.150.200.165/cisco/directory/services.php">http://10.150.200.165/cisco/directory/services.php</A>"</DIV>
<DIV> </DIV>
<DIV># URL for external Directory location<BR>directory_url: "<A
href="http://10.150.200.165/cisco/directory/directory.php">http://10.150.200.165/cisco/directory/directory.php</A>"</DIV>
<DIV> </DIV>
<DIV># URL for branding logo<BR>logo_url: "<A
href="http://10.150.200.165/cisco/aah.bmp">http://10.150.200.165/cisco/aah.bmp</A>"</DIV>
<DIV> </DIV>
<DIV># Remote Party ID<BR>remote_party_id:
1
; 0-Disabled (default), 1-Enabled</DIV>
<DIV> </DIV>
<DIV></FONT></SPAN> </DIV></BLOCKQUOTE></BODY></HTML>
<BR>
<BR>
<BR>
<P><B><FONT SIZE=2 FACE="Arial">The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.</FONT></B> </P>
<BR>