<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2627" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am using a Junghans quadBRI ISDN card and it is
loaded and working. In Asterisk if I connect to ISDN line it is detected
and tells me so.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>In my zapata.conf I have
(abbreviated):</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>[channels]</FONT></DIV>
<DIV><FONT face=Arial size=2>switchtype=euroisdn</FONT></DIV>
<DIV><FONT face=Arial size=2>signalling = bri_cpe</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>context=default</FONT></DIV>
<DIV><FONT face=Arial size=2>group=1</FONT></DIV>
<DIV><FONT face=Arial size=2>channel => 1-2</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>;plus group 2 - 4</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>zaptel.conf:</FONT></DIV>
<DIV><FONT face=Arial size=2>loadzone=uk<BR>defaultzone=uk<BR># qozap span
definitions<BR># most of the values should be bogus because we are not really
zaptel<BR>span=1,1,3,ccs,ami<BR>span=2,0,3,ccs,ami<BR>span=3,0,3,ccs,ami<BR>span=4,0,3,ccs,ami</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial
size=2>bchan=1,2<BR>dchan=3<BR>bchan=4,5<BR>dchan=6<BR>bchan=7,8<BR>dchan=9<BR>bchan=10,11<BR>dchan=12</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Then in extensions.conf I have:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>[default]</FONT></DIV>
<DIV><FONT face=Arial size=2>; this below for internal extensions - works
OK</FONT></DIV>
<DIV><FONT face=Arial size=2>exten =>
_2XX,1,Dial(SIP/${EXTEN},20,Ttm)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>; for dialing outbound - over ISDN line - this bit
does not work</FONT></DIV>
<DIV><FONT face=Arial size=2>exten =>
_9XX.,2,Dial(ZAP/g1/${EXTEN},60)</FONT></DIV>
<DIV><FONT face=Arial size=2>exten => _9XX.,2,Hangup</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Error I get is:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> -- Executing
Dial("SIP/200-e433", "ZAP/g1/902088787367|60") in new stack<BR>Jul 25 11:56:33
NOTICE[6723]: app_dial.c:777 dial_exec: Unable to create channel of type
'ZAP'<BR> == Everyone is busy/congested at this time<BR>
-- Executing Hangup("SIP/200-e433", "") in new stack<BR> == Spawn
extension (default, 902088787367, 2) exited non-zero on
'SIP/200-e433'</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am dialing with sip phones. They work if
dialing extensions internally but not if try to dial outside - eg dial 9
followed by number.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>What have I not done right?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Angus</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>