<br><font size=2 face="sans-serif">Hi,</font>
<br><font size=2 face="sans-serif">I installed a Quadbri card, configured
with 2 ports connected to a Hipath pbx an 2 ports connected to telco.</font>
<br><font size=2 face="sans-serif">I can make and receive call but I receive
every 5 seconds on asterisk cli the message: "No D-channel available
Using Primary on channel aniway 12</font>
<br><font size=2 face="sans-serif">Primary D-channel on span 4 up"</font>
<br><font size=2 face="sans-serif">My zapata.conf</font>
<br><font size=2 face="sans-serif">[channels]</font>
<br><font size=2 face="sans-serif">switchtype = euroisdn</font>
<br>
<br><font size=2 face="sans-serif">pridialplan = dynamic</font>
<br><font size=2 face="sans-serif">prilocaldialplan = local</font>
<br><font size=2 face="sans-serif">nationalprefix = 0</font>
<br><font size=2 face="sans-serif">internationalprefix = 00</font>
<br><font size=2 face="sans-serif">usecallingpres=yes</font>
<br>
<br><font size=2 face="sans-serif">echocancel = yes</font>
<br><font size=2 face="sans-serif">echocancelwhenbridged = yes</font>
<br><font size=2 face="sans-serif">echotraining = 100</font>
<br>
<br><font size=2 face="sans-serif">context=isdn-incoming</font>
<br><font size=2 face="sans-serif">group = 1</font>
<br><font size=2 face="sans-serif">immediate=no</font>
<br><font size=2 face="sans-serif">signalling = bri_cpe</font>
<br><font size=2 face="sans-serif">channel => 1-2</font>
<br><font size=2 face="sans-serif">channel => 10-11</font>
<br>
<br><font size=2 face="sans-serif">context=pbx-incoming</font>
<br><font size=2 face="sans-serif">group = 2</font>
<br><font size=2 face="sans-serif">immediate=no</font>
<br><font size=2 face="sans-serif">signalling = bri_net</font>
<br><font size=2 face="sans-serif">channel => 4-5</font>
<br><font size=2 face="sans-serif">channel => 7-8</font>
<br>
<br><font size=2 face="sans-serif">zaptel.conf</font>
<br>
<br><font size=2 face="sans-serif">loadzone=it</font>
<br><font size=2 face="sans-serif">defaultzone=it</font>
<br><font size=2 face="sans-serif"># qozap span definitions</font>
<br><font size=2 face="sans-serif"># most of the values should be bogus
because we are not really zaptel</font>
<br><font size=2 face="sans-serif">span=1,1,3,ccs,ami</font>
<br><font size=2 face="sans-serif">span=2,0,3,ccs,ami</font>
<br><font size=2 face="sans-serif">span=3,0,3,ccs,ami</font>
<br><font size=2 face="sans-serif">span=4,0,3,ccs,ami</font>
<br>
<br><font size=2 face="sans-serif">bchan=1,2</font>
<br><font size=2 face="sans-serif">dchan=3</font>
<br><font size=2 face="sans-serif">bchan=4,5</font>
<br><font size=2 face="sans-serif">dchan=6</font>
<br><font size=2 face="sans-serif">bchan=7,8</font>
<br><font size=2 face="sans-serif">dchan=9</font>
<br><font size=2 face="sans-serif">bchan=10,11</font>
<br><font size=2 face="sans-serif">dchan=12</font>
<br>
<br>