<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1505" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>I just install a Digium TDM04B card. I created 4 separate Zap channels and
one outbound routing containing zap channels from 1 to 4. If a phone line is
plug in Zap/1 then works fine, but if I unplug phone line from Zap/1 (simulating
fail) the system keep dialing out on Zap/1, even with no dial tone; Only if
Zap/1 is busy it will use Zap/2. <BR>There is any work around or different
setting to avoid this situation?<BR></DIV></BODY></HTML>