<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1491" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I have an eight channel fxo setup (2 TDM400P cards)
and I have them setup. Here are my configs:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Zaptel.conf:</FONT></DIV><FONT face=Arial>
<DIV><BR></FONT><FONT face="Courier New"
size=2>fxsks=1-8<BR>loadzone=us<BR>defaultzone=us</FONT></DIV>
<DIV><FONT face="Courier New" size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Zapata.conf:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face="Courier New" size=2>[trunkgroups]</FONT></DIV>
<DIV><FONT size=2><FONT face=Arial></FONT><BR><FONT
face="Courier New">[channels]</FONT></DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV><FONT face="Courier New">musiconhold=default<BR>rxwink=300 ;
Atlas seems to use long (250ms)
winks<BR>usecallerid=yes<BR>hidecallerid=no<BR>callerid=xxxxxx<BR>callwaiting=yes<BR>busydetect=no<BR>callprogress=no<BR>usecallingpres=yes<BR>callwaitingcallerid=yes<BR>threewaycalling=yes<BR>transfer=yes<BR>cancallforward=yes<BR>callreturn=yes<BR>echocancel=yes<BR>echocancelwhenbridged=yes<BR>echotraining=800<BR>rxgain=0.0<BR>txgain=0.0</FONT></DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV><FONT
face="Courier New">group=0<BR>callgroup=1<BR>pickupgroup=1<BR>immediate=no<BR>;faxdetect=incoming<BR>faxdetect=no</FONT></DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV><FONT
face="Courier New">signalling=fxs_ks<BR>callerid=asreceived<BR>context=from-pstn<BR>channel=>1-8<BR></FONT></FONT><FONT></FONT></DIV>
<DIV><FONT><FONT face=Arial size=2>Now calling in is no problem, all the
channels pick up the incoming call just fine. However, for some reason,
calling out does not work.</FONT></FONT></DIV>
<DIV><FONT><FONT face=Arial size=2></FONT></FONT> </DIV>
<DIV><FONT><FONT face=Arial size=2>When I dial out (I have a default trunk
setup) I get this on the console:</FONT></FONT></DIV><FONT><FONT face=Arial
size=2>
<DIV><BR><FONT face="Courier New"> -- Executing
Macro("SIP/201-1d90", "dialout-default|636399xxx") in new
stack<BR> -- Executing GotoIf("SIP/201-1d90", "1?4") in new
stack<BR> -- Goto
(macro-dialout-default,s,4)<BR> -- Executing
GotoIf("SIP/201-1d90", "1?6") in new stack<BR> -- Goto
(macro-dialout-default,s,6)<BR> -- Executing
Dial("SIP/201-1d90", "ZAP/g0/6363997681") in new stack<BR> --
Called g0/636399xxxx<BR> -- Zap/1-1 answered
SIP/201-1d90</FONT></DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV>But it doesn't answer, nothing rings (locally or on my cellphone, the test
number I'm calling out to) it just says "connected" on the local phone but its
not actually connecting. This problem is very weird because as of 5 hours
ago, I only had 1 TDM400P card and 1 FXO chip and I could make outgoing calls
with no problems at all. </DIV>
<DIV> </DIV>
<DIV>P.S. </DIV>
<DIV>I have checked the phone line I'm testing this on and it is
fine.</FONT></DIV></FONT></BODY></HTML>