<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1491" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>I just installed <A
href="mailto:asterisk@home">asterisk@home</A> and connected it to broadvoice via
SIP. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I've setup an auto-attendant, extensions and
everything it working extremely well.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I can dial in, I can dial out. Everything
works great. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>What I am using is as follows:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> Box is an generic Intel box with a PIII/1Ghz
processor and 256Mb of RAM and a 4 Gb drive.</FONT></DIV>
<DIV><FONT face=Arial size=2> Network is behind a basic NAT from a Linksys
cable router.</FONT></DIV>
<DIV><FONT face=Arial size=2> Outbound is provided by broadvoice.com VoIP
provider via SIP.</FONT></DIV>
<DIV><FONT face=Arial size=2> I'm using X-lite softphones from
xten.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have found everything pretty much self-explanator
and easy to use. I can not, however, despite a lot of searching on
the internet and a lot of reading and checking pages, find answers to a few
basic questions. </FONT><FONT face=Arial size=2>My questions are as
follows:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>1. I've searched and searched. I've
read the entire draft of the users guide. I can not find a decent list of
the dial codes, such as this short list:</FONT></DIV>
<DIV><!--StartFragment --><FONT face=Arial size=2> <TR><TD>*72</TD><TD>Call
Forwarding System</FONT></DIV>
<DIV></TD></TR><TR><TD><FONT face=Arial size=2> *73</TD><TD>Disable Call
Forwarding</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*77</TD><TD>IVR
Recording</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*78</TD><TD>Enable
Do-Not-Disturb</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*79</TD><TD>Disable
Do-Not-Disturb</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*90</TD><TD>Call Forward on
Busy</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*91</TD><TD>Disable Call
Forward on Busy</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*98</TD><TD>Enter Message
Center (also found that *98<exten> enters extention
directly)</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>*99</TD><TD>Playback IVR
Recording</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>7777</TD><TD>Simulate
incoming call</FONT></DIV>
<DIV><FONT face=Arial size=2> </TD></TR><TR><TD>1234</TD><TD>System will
tell you your extension</TD></TR> </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>2. I want to know if there is a dial code or
a way of putting calls on hold. I've set this up to get some
experience with Asterisk to evaluation a possible migration from our Inter-Tel
system at work to asterisk. It is on my system at home, but if I can not
get a hold feature, it would not work for work.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I got all of this working after reading an article
from a link on slashdot.org to <A
href="http://www.geekgazette.com/index.php?option=com_content&task=view&id=2&Itemid=26">http://www.geekgazette.com/index.php?option=com_content&task=view&id=2&Itemid=26</A> and
it's all working great. I want to test the on hold system and the on hold
music, but I can not.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I appreciate your answers.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>GP</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></FONT></DIV></BODY></HTML>