<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2604" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I was able to get Asterisk working with the demo on
FreeBSD 5.3 without crashing, but not the music on hold, so I just have that
disabled for now, but I'm ready to get some IP hardware working.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>So I picked up a Cisco 12sp+ IP phone
(mistake?) and am having difficulty finding any truly helpful
instructions / troubleshooting to get this configured to work with
asterisk. If I could just get past the first hurdle of getting it an IP
address (not using dhcp)... </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I plug it in, it says 'Copyright 1999 F2.02 Cisco
Systems Inc.' and line 1 led is blinking. Then when I press
**, and it comes up with 'Status=0x08000'. After a while, line 2 led
starts blinking too, and when I press **, it comes up with
'Status=0x08026'</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>At this point I do not have it plugged into the
ethernet.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any suggestions?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>-Tyler</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>