<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000066">
<font size="-1"><font face="Verdana">Hi all,<br>
<br>
I have two questions regarding CAPI. Excuse the fact that they are
very 'newbie' in nature, but the CAPI documentation is wafer thin!<br>
<br>
Firstly I have four BRI adapters (all trunks and controlled by CAPI) in
my * box and I would like to know whether I can group these together
for dialling out in the same way that ZAP channels can be grouped
together.<br>
<br>
Secondly I have a problem where * doesn't seem to recognise incoming
calls when one of the B channels is in use. If someone is on the phone
to an external number, for example, then incoming calls ring (for the
caller, at least) but * doesn't seem to have any idea that the channel
is ringing.<br>
<br>
Lastly, my capi.conf (as below) only defines one controller as this is
what we are testing with. My understanding is that the interface block
(starting with 'msn=470' and ending with 'devices=2') needs to be
repeated for each of the four BRI adapters, but with the correct MSN
for each. The documentation I have seen is ambiguous, can anyone
confirm this is correct?<br>
<br>
Thanks in advance,<br>
I M Newbie.<br>
<br>
</font></font>
<pre wrap="">;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
musiconhold=random
[interfaces]
msn=470
incomingmsn=*
controller=1
softdtmf=1
accountcode=
context=incoming
;echosquelch=1
;echocancel=yes
;echotail=64
;callgroup=1
;deflect=12345678
devices=2</pre>
<br>
<pre class="moz-signature" cols="72">--
FFF Managed Technology Ltd
60 Cook St
P.O. 6368 Wellesley St
Auckland
t +64 9 356 2911
f +64 9 358 9070
m +64 21 415 297
w <a class="moz-txt-link-abbreviated" href="http://www.fff.co.nz">www.fff.co.nz</a></pre>
</body>
</html>