<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=windows-1252"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
One thing that I noted is that you mentioned you don't see anything on
the tftp server. If tftp isn't seeing a request, that usually means you
have a switch or router that is preventing broadcasts. What does the
top right of the phone says, if there is a SIP firmware on the phone it
should say sip. If you have tftp running in verbose logging mode, you
should see every file request and what the server response was. You
can use a packet sniffer and make sure that the phone is transmitting
tftp/dhcp requests.<br>
<br>
Randy MacKay wrote:
<blockquote
cite="midKCECLPIGBFIMGNAOCOJMGEHBCKAA.randymackay@earthlink.net"
type="cite">
<pre wrap="">When I push the settings button, nothing happens. I never get a chance to
put in the password.
I think the previous owner may have messed up a firmware upgrade.
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a>
[<a class="moz-txt-link-freetext" href="mailto:asterisk-users-bounces@lists.digium.com">mailto:asterisk-users-bounces@lists.digium.com</a>]On Behalf Of Sean Cook
Sent: Thursday, December 16, 2004 11:40 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Has anyone connected to 7960 with
consolecablefor setup?
Why can't you use the settings button? If
you know the password (or using the default
password) you should be able to unlock the
phone and do a hard reset...
Sean
</pre>
<blockquote type="cite">
<pre wrap="">-----Original Message-----
From:
</pre>
</blockquote>
<pre wrap=""><!----><a class="moz-txt-link-abbreviated" href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a>
</pre>
<pre wrap=""><!---->[<a class="moz-txt-link-freetext" href="mailto:asterisk-users-bounces@lists.digium.c">mailto:asterisk-users-bounces@lists.digium.c</a>
om] On Behalf Of
</pre>
<blockquote type="cite">
<pre wrap="">Randy MacKay
Sent: Thursday, December 16, 2004 1:35 PM
To: <a class="moz-txt-link-abbreviated" href="mailto:asterisk-users@lists.digium.com">asterisk-users@lists.digium.com</a>
Subject: [Asterisk-Users] Has anyone
</pre>
</blockquote>
<pre wrap=""><!---->connected to 7960 with
</pre>
<blockquote type="cite">
<pre wrap="">console cablefor setup?
I have a Cisco 7960 phone. I cannot seem
</pre>
</blockquote>
<pre wrap=""><!---->to use the settings
</pre>
<blockquote type="cite">
<pre wrap="">button to get into the phone to change the
</pre>
</blockquote>
<pre wrap=""><!---->TFTP server. I've
</pre>
<blockquote type="cite">
<pre wrap="">set up a DHCP Server, TFTP Server with the
</pre>
</blockquote>
<pre wrap=""><!---->same address, and
</pre>
<blockquote type="cite">
<pre wrap="">the phone requests the address of 0.0.0.0,
</pre>
</blockquote>
<pre wrap=""><!---->the server offers
</pre>
<blockquote type="cite">
<pre wrap="">the address of 192.168.2.2, but the phone
</pre>
</blockquote>
<pre wrap=""><!---->seems not to take it.
</pre>
<blockquote type="cite">
<pre wrap="">I have no action on the TFTP side.
So, since I can't seem to server the phone
</pre>
</blockquote>
<pre wrap=""><!---->anything by TFTP,
</pre>
<blockquote type="cite">
<pre wrap="">and I can't use the settings button, then I
</pre>
</blockquote>
<pre wrap=""><!---->thought I might
</pre>
<blockquote type="cite">
<pre wrap="">make a console cable (see below). I tried
</pre>
</blockquote>
<pre wrap=""><!---->to use
</pre>
<blockquote type="cite">
<pre wrap="">hyperTerminal, but got no response from the
</pre>
</blockquote>
<pre wrap=""><!---->phone.
</pre>
<blockquote type="cite">
<pre wrap="">Anyone have any ideas?
Thanks,
Randy
I found a link to make a Cisco Console
</pre>
</blockquote>
<pre wrap=""><!---->Cable for RJ-45.
</pre>
<pre wrap=""><!----><a class="moz-txt-link-freetext" href="http://www.hardwarebook.net/cable/serial/cisc">http://www.hardwarebook.net/cable/serial/cisc</a>
oconsole9.html
</pre>
<blockquote type="cite">
<pre wrap=""> DB9F RJ45
Receive Data 2 3
Transmit Data 3 6
Data Terminal Ready 4 7
Ground 5 4
Ground 5 5
Data Set Ready 6 2
Request to Send 7 8
Clear to Send 8 1
The Console Access Manual, give the
</pre>
</blockquote>
<pre wrap=""><!---->following cable information:
</pre>
<blockquote type="cite">
<pre wrap="">Console Cable Requirements
You use a serial cable with a connector to
</pre>
</blockquote>
<pre wrap=""><!---->connect a PC and a
</pre>
<blockquote type="cite">
<pre wrap="">phone. The cable uses an RJ-11 connector
</pre>
</blockquote>
<pre wrap=""><!---->for the phone and an
</pre>
<blockquote type="cite">
<pre wrap="">RJ-45 connector to an
RJ-45-to-DB9 converter for the PC. Table
</pre>
</blockquote>
<pre wrap=""><!---->D-1 shows the pinout
</pre>
<blockquote type="cite">
<pre wrap="">requirements for the console cable.
Table D-1 Console Cable Pinouts
RJ-11 Connector RJ-45 Connector
Pin 2 ========== Pin 6
Pin 3 ========== Pin 4
Pin 4 ========== Pin 3
So, I thought I would go right from DB9F to
</pre>
</blockquote>
<pre wrap=""><!---->RJ-11
</pre>
<blockquote type="cite">
<pre wrap="">DB9F RJ-45 RJ-11
Pin 2 Pin 3 Pin 4
Pin 5 Pin 4 Pin 3
Pin 3 Pin 6 Pin 2
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system
</pre>
</blockquote>
<pre wrap=""><!---->(<a class="moz-txt-link-freetext" href="http://www.grisoft.com">http://www.grisoft.com</a>).
</pre>
<blockquote type="cite">
<pre wrap="">Version: 6.0.817 / Virus Database: 555 -
</pre>
</blockquote>
<pre wrap=""><!---->Release Date: 12/15/2004
</pre>
<blockquote type="cite">
<pre wrap="">
</pre>
</blockquote>
<pre wrap=""><!---->_____________________________________________
__
</pre>
<blockquote type="cite">
<pre wrap="">Asterisk-Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
</pre>
</blockquote>
<pre wrap=""><!----><a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/aste">http://lists.digium.com/mailman/listinfo/aste</a>
risk-users
</pre>
<blockquote type="cite">
<pre wrap="">To UNSUBSCRIBE or update options visit:
</pre>
</blockquote>
<pre wrap=""><!----><a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/aste">http://lists.digium.com/mailman/listinfo/aste</a>
risk-users
</pre>
<pre wrap=""><!---->
_______________________________________________
Asterisk-Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
To UNSUBSCRIBE or update options visit:
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (<a class="moz-txt-link-freetext" href="http://www.grisoft.com">http://www.grisoft.com</a>).
Version: 6.0.817 / Virus Database: 555 - Release Date: 12/15/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (<a class="moz-txt-link-freetext" href="http://www.grisoft.com">http://www.grisoft.com</a>).
Version: 6.0.817 / Virus Database: 555 - Release Date: 12/15/2004
_______________________________________________
Asterisk-Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
To UNSUBSCRIBE or update options visit:
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
</pre>
</blockquote>
<br>
</body>
</html>